Block ip on the same subnet in Sangfor firewall

Ervin Santos Lv1Posted 14 Mar 2024 19:55

Hi guys! Has anyone here tried blocking an IP on the same subnet? Then, only selected ones are allowed to access a specific IP?

Newbie517762 has solved this question and earned 10 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

HiHi,

Please try to add the IP address to the Global Blacklist.
See the below information for your reference:
In NGAF Platform\SOC\Blacklist\Global Blacklist.

Is this answer helpful?
Newbie517762 Lv5Posted 15 Mar 2024 12:23
  
HiHi,

Please try to add the IP address to the Global Blacklist.
See the below information for your reference:
In NGAF Platform\SOC\Blacklist\Global Blacklist.

AimanHakim Lv2Posted 15 Mar 2024 16:52
  
Hi, you can use Newbie517762 method of black list or configure in the access control policy. For me a blacklist is kinda an overkill hahaha. never thought of that way before
Prosi Lv2Posted 17 Mar 2024 18:42
  
Clients do not even go through the firewall when they are accessing others in the same subnet.
Farina Ahmed Lv5Posted 19 Mar 2024 13:35
  
Create an access control list (ACL) to define the desired traffic policies. First, identify the IP addresses to be blocked and allowed within the subnet. Then, configure the ACL to deny traffic from the blocked IPs while permitting traffic from the selected ones to reach the specific IP. Ensure proper subnet masking and specificity in the ACL rules to accurately target the desired IP ranges.
Tayyab0101 Lv2Posted 19 Mar 2024 13:41
  
can be achieved by using ACL.
mdamores Lv3Posted 19 Mar 2024 13:47
  
You need to create policies thru Access control List or ACL to allow/deny access to certain IP address on the same subnet
Enrico Vanzetto Lv3Posted 19 Mar 2024 16:18
  
Hi, you can try to establish an Access Control List (ACL) to outline the required traffic rules. Initially, pinpoint the IP addresses that should be permitted and blocked within the subnet. Next, set up the ACL to reject traffic from the blocked IPs while allowing traffic from the chosen ones to access the specific IP. Make sure to apply correct subnet masking and precision in the ACL rules to precisely target the intended IP ranges.
Ervin Santos Lv1Posted 19 Mar 2024 16:55
  
Here's the screenshot of the Application Control Policy but it's not working
pmateus Lv2Posted 19 Mar 2024 16:58
  
Hi,

You can use Access Control Lists (ACLs) to block specific IP addresses. ACLs are a set of rules that control network traffic and can be configured to deny or permit traffic from certain IP addresses to enhance network security.

I Can Help:

Change

Moderator on This Board

1
131
3

Started Topics

Followers

Follow

18
8
0

Started Topics

Followers

Follow

Board Leaders