Anyone can help!

SassyScorpio Lv2Posted 15 Mar 2023 23:20

How do I set up a VPN connection using Sangfor's solutions?

Faisal Piliang has solved this question and earned 20 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

Configure an SNAT rule to enable this SSL VPN device to access the Internet on behalf of LAN users and server. Navigate to [Firewall] > [NAT] > [SNAT Rule], create a SNAT rule and add the source IP addresses into the Source Address field
Is this answer helpful?
Faisal Piliang Posted 16 Mar 2023 09:24
  
Configure an SNAT rule to enable this SSL VPN device to access the Internet on behalf of LAN users and server. Navigate to [Firewall] > [NAT] > [SNAT Rule], create a SNAT rule and add the source IP addresses into the Source Address field
Abdul Sami Lv2Posted 16 Mar 2023 12:57
  
Setting up a VPN connection using Sangfor's solutions may vary depending on the specific solution you choose, Sangfor offers several VPN solutions such as SSL VPN, IPsec VPN, and L2TP VPN.

1. Configure the VPN server. Sangfor offers a range of VPN solutions that can be tailored to meet your network requirements. Depending on the type of VPN you're setting up, the configuration steps may vary.

2. Install the client software on each device you want to connect to the VPN server. The Sangfor client software is available for Windows, Mac, and mobile devices.

3. Configure the client software. You will need to provide the information necessary to connect each device to the VPN server. This typically includes the server address, username, and password.

4. Test the connection. Once the client software has been configured, you can test the connection to make sure it is working properly.

5. Connect the devices. Once the connection has been tested, you can start connecting your devices to the VPN server.
rivsy Lv5Posted 16 Mar 2023 14:01
  
You can configure it under SNAT tab, from there you can configure it manually base on your preference.
Jhazz Lv3Posted 16 Mar 2023 15:50
  
Sangfor have a SSL VPN solution for that.

I Can Help:

Change

Moderator on This Board

3
8
0

Started Topics

Followers

Follow

Trending Topics

Board Leaders