Max Storage

Pilita Lv2Posted 20 Feb 2023 21:39

What would be the max storage of Sangfor HCI with 3 nodes

Abdul Sami has solved this question and earned 10 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

The maximum storage capacity of a Sangfor HCI (Hyper-Converged Infrastructure) system with 3 nodes will depend on several factors, such as the size and number of hard disk drives or solid-state drives installed in each node, the RAID configuration used, and the amount of data redundancy desired.
Sangfor HCI supports multiple storage options, including locally attached storage on each node, shared storage using SAN (Storage Area Network) or NAS (Network-Attached Storage), and cloud-based storage. The maximum storage capacity can also be increased by adding additional nodes to the HCI cluster.

Minimum Sangfor HCI with 3 nodes can support up to 4PB of total storage capacity.

Is this answer helpful?
Rica Cortez Lv2Posted 28 Feb 2023 15:08
  
I think it is a raid version or number
SteveD Lv2Posted 28 Feb 2023 14:45
  
I believe it is determined by the type of RAID and other disk-related factors.
Ashley Anne Lv2Posted 28 Feb 2023 14:41
  
how much data you intend to store. Both your requirements and the model number are important. A specific model number can support a specific amount of data. It is preferable to follow the Sangfor HCI deployment guide, which I attempted to locate and paste here but was unable to find. If necessary, contact the TAC team.
Rashley Lv2Posted 28 Feb 2023 14:36
  
how much data you intend to keep in the storage. Your needs and the model number both play a role. A particular model number can support a particular amount of data. It would be better to adhere to the Sangfor HCI deployment guide, which I attempted to locate and paste here but was unsuccessful in doing. Contact the TAC team if necessary.
Rhebie Lv3Posted 28 Feb 2023 14:30
  
I believe it depends on the type of RAID and additional disk-related factors.
RegiBoy Lv5Posted 28 Feb 2023 14:26
  
It depends on the RAID
Farina Ahmed Posted 27 Feb 2023 15:30
  
The amount of data you want to store in the storage. It depend on your need but also depend on the model number. Specific model number support specific amount of data. It would be better to follow the deployment guide for Sangfor HCI. I tried to find it and paste it here but unfortunately I dont find it. Else contact sangfor TAC team.
Pat Lv4Posted 27 Feb 2023 13:34
  
Actually it depends on the specification of the hard drive
CLELUQMAN Lv3Posted 27 Feb 2023 13:31
  
it will depend on the specific hardware and configuration used. a 3-node HCI cluster could potentially support several terabytes of storage capacity, ranging from a few terabytes up to tens of terabytes or more.
Imran Tahir Lv4Posted 27 Feb 2023 12:28
  
The maximum number of storage based snapshot can be take is 128.

I Can Help:

Change

Moderator on This Board

3
0
2

Started Topics

Followers

Follow

2
0
0

Started Topics

Followers

Follow

2
20
0

Started Topics

Followers

Follow

Board Leaders