Not all types of interfaces shown 5

imsfckw Posted 05 Dec 2022 21:42

Hi all! There's only 3 types of interfaces (Layer 3, Layer 2 and Virtual Wire) on my vNGAF 8.0.47 but i need Mirror mode. Is it possible to set up mirror interface on virtual NGAF?

Happpy has solved this question and earned 25 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins, 5 coins of bounty and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

Virtual NGAF is not supported
Is this answer helpful?
Bebe_Bote Lv3Posted 15 Dec 2022 00:47
  
vNGAF is not supported.
Kalem Lv3Posted 15 Dec 2022 00:37
  
virtual NGAF is not supported.
Zonger Lv4Posted 13 Dec 2022 17:36
  
physical appliance is required to use the mirroring mode
arjay Lv3Posted 13 Dec 2022 12:51
  
Yes you can mirror it just select "Mirror" in the "Route" then fill up the rest of the tab
Faisal P Posted 13 Dec 2022 12:06
  
Yes, it is. Choose Network > Interface > Virtual Wire to add a virtual wire. Step 5: Configure switchover for the switches and routers on the intranet.
Noman Rajput Lv2Posted 12 Dec 2022 18:45
  
Mirror mode can be configured in appliance based NGAF only.
Farina Ahmed Lv5Posted 12 Dec 2022 15:01
  
First set it to mirror mode and then set the mirror interface.
Mikee Lv2Posted 12 Dec 2022 10:42
  
The virtual appliance does not support mirrors because of the port on the server.
KarenD Lv2Posted 12 Dec 2022 10:40
  
Due to the server's port, the virtual appliance does not support mirrors.
Noah19 Lv3Posted 12 Dec 2022 10:39
  
Mirror is not supported in Virtual appliance because of Port of the server

I Can Help:

Change

Moderator on This Board

1
131
3

Started Topics

Followers

Follow

18
8
0

Started Topics

Followers

Follow

Board Leaders