NGAF mode 95

Fuji12 Lv2Posted 29 Nov 2022 22:43

What mode can I used for my NGAF if I need to just copy traffic for inspection? Can anyone give me a tutorial for that.

RegiBoy has solved this question and earned 115 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins, 95 coins of bounty and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

I think you are pertaining to the Mirror Mode of the NGAF

Mirror Mode.jpg
Is this answer helpful?
RegiBoy Lv4Posted 30 Nov 2022 18:41
I think you are pertaining to the Mirror Mode of the NGAF

Mirror Mode.jpg
MISMDS Lv2Posted 30 Nov 2022 23:17
Mirror mode lets you configure the NGAF as sniffing tools
LucyHeart Lv2Posted 01 Dec 2022 09:02
I think it is a bridge mode.
rivsy Lv4Posted 01 Dec 2022 09:41
You can use either Mirror Mode or Bridge Mode to the NGAF.
Mirror Mode:
1. upstream and downstream data must be mirrored pass through server

Bridge Mode:
1. Must apply bridge mode in the interface with access mode
Khawar Lv1Posted 01 Dec 2022 13:20
If you just want to monitor the traffic, mirror mode will be best for this scenario.
Happpy Lv2Posted 05 Dec 2022 09:43
Either monitor or bridge mode
Noah19 Lv2Posted 05 Dec 2022 10:30
It should be Monitor Mode to have the capability just like wireshark
NeTSec Lv2Posted 05 Dec 2022 10:36
I suggest you deploy a bridge mode.
Faisal P Lv8Posted 05 Dec 2022 10:41
You can use external iSCSI or FC storage, or build virtual storage by ... deployment mode is selected, you need to deploy the network

I Can Help:


Moderator on This Board


Started Topics



Board Leaders