Sangfor IAG - AD Users are not sync in IAG user's list

arjay Lv3Posted 27 Oct 2022 09:50

There are some AD users that were not recorded/sync in IAG user list

May I know what might be the cause?

Thank You!

CTI_JianJie has solved this question and earned 10 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

Last edited by CTI_JianJie 07 Nov 2022 16:19.

There is 3 common root cause causing certain AD users to be unable to synchronize with Sangfor IAG online user:
1. Check if there are any local users available, if yes, it will not sync again as the AD users
2. Check the authentication policy if the target object is the user.
3. Check on the AD user group, Sangfor IAG got limited on the maximum nested AD user group that can synchronize.
If you need further assistance, please do not hesitate to contact sangfor support team via email tech.support@sangfor.com
Is this answer helpful?
Brooker Lv3Posted 07 Nov 2022 08:38
  
The firmware needs to be updated
kmrnliaqat Lv3Posted 05 Nov 2022 17:11
  
Version need to update
Deorwine Lv2Posted 03 Nov 2022 11:04
  
Try to firmware upgrade
Luih Miranda Lv3Posted 02 Nov 2022 08:25
  
Please make a firmware upgrade.
Faisal P Posted 01 Nov 2022 12:30
  
Users synchronized to the IAM by using the automatic synchronization function on the user management page.
Brooker Lv3Posted 01 Nov 2022 10:43
  
Check carefully if the system time is sync and the integration with the AD is successful
jetjetd Lv5Posted 01 Nov 2022 01:32
  
Update the firmware of the appliance and double check the system time of your appliance.
Imran Tahir Lv4Posted 01 Nov 2022 01:21
  
Check the user OS
nobitachou Lv2Posted 31 Oct 2022 20:18
  
I'm sure it takes time especially on a large numbers of users.

I Can Help:

Change

Moderator on This Board

15
21
3

Started Topics

Followers

Follow

Board Leaders