The selected interface does not have a valid IP address that can be used for LAN interface.

Newbie855961 Lv1Posted 12 Aug 2022 15:30

Hello everyone!
I am tring to configure an SSL VPN. Topology is pretty simple:
pic1.png

In deployment I've choosed the Gateway Mode and Lan/Wan interfaces.
3028862f60142b6ee3.png
But when I try to apply this configuration I see this error:
5539962f60169df5c5.png
I don't understand how to fix it. Need Help!
Thanks.
5020662f60003b8588.png

EvgeniyOlkov has solved this question and earned 10 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

Ok. The issue was in my LAN interface. It has management role too. I've choosed other interface and it works ok.
Is this answer helpful?
EvgeniyOlkov Lv1Posted 12 Aug 2022 17:22
  
Ok. The issue was in my LAN interface. It has management role too. I've choosed other interface and it works ok.
Shared by Author
jetjetd Lv5Posted 12 Aug 2022 19:07
  
Your network diagram is correct but for your issue, I think the interface eth0/eth1 does not have a valid IP address yet. Did these interfaces already had an IP? Kindly configure a static address for this two interfaces...thank you
Imran Tahir Lv4Posted 15 Aug 2022 12:25
  
Fine. The issue was in my LAN interface. It has a management role too. My other eth its working fne
kmrnliaqat Lv3Posted 15 Aug 2022 12:31
  
Fine. The issue was in my LAN interface. It has a management role too. My other eth its working fne
rivsy Lv4Posted 15 Aug 2022 14:04
  
If the IP address is set to static IP, just check the default gateway if is the same.
Dohan4U Lv2Posted 15 Aug 2022 15:06
  
Check all the connections and role if not duplicate
JamesMee Lv2Posted 15 Aug 2022 15:14
  
Check if the eth0 interface is properly connected connection same with WAN) port
Pat Lv3Posted 15 Aug 2022 17:19
  
Check the default gateway if the same and also all the connections
Faisal P Lv8Posted 15 Aug 2022 17:46
  
Could you check the connection and the role

I Can Help:

Change

Board Leaders