#Installation Guide# Sangfor aCloud Installation Guidelines

jetjetd Lv5Posted 30 Jun 2022 14:10

Last edited by jetjetd 30 Jun 2022 15:38.

Sangfor aCloud Installation Guidelines

Product: aCloud

          1. Sangfor aCloud (HCI) latest firmwareinstallation image (.ISO) (can be downloaded at Sangfor Community)
          2. USB drive (capacity more than 4GB)
          3. UltraISO image utility tools

Configuration Steps——

Step 1.  Download and installdisk imaging tools. We will be using UltraISO to write aCloud firmware into  USBdrive. Follow the screenshot steps below to write the aCloud firmware into USBdrive.




Step 2.  Once aCloud firmware has been written in the USB, the below screen will be seen, and you can now click “Close” the window screen.

Step 3.  Plug in the USB drive and power on theserver. Press DELETE (DEL) to enter BIOS Setup

Step 4.  Select Boot option and change the 1st Boot Device to USB drive.

Step 5.  Save the configuration and exit.

Step 6.  Let the server boot in the USB drive and selectthe topmost option “Install Sangfor aCloud on thismachine” and in the next window select the “Sangfor aCloud Installer”option.


Step 7.  Press “I agree” to agree terms and conditions.

Step 8.  When you see this, Sangfor aCloud has alreadybeen installed. Click Yes to confirm format the existing drive.

Step 9.  Ensure select the correct system disk for installation.

Step 10.  When the below screen prompts, select “No” to skip benchmarking.

Step 11.  In the next screen, edit the networkconfiguration of the eth0.

Step 12.  Change the IP address, netmask and gateway for eth0.

Step 13.  Select “No” if you will not configure VLAN.

Step 14.  Installation completed. Click “OK” to restart the server.

Step 15.  Once reboot, you must enter the BIOS setup and change the 1st boot device to system disk.

Step 16.  Select Save configuration and reset option and click “Yes”.

Step 17.  Once the server boots in the system. The screenappears and now you can connect eth0 to access web console with the configured IP address.

Step 18.  You can now access the aCloud server usingyour browser. We will be using the default username and password which is admin.

Step 19.  After logging in you will see the below window screen.

Like this topic? Like it or reward the author.

Creating a topic earns you 5 coins. A featured or excellent topic earns you more coins. What is Coin?

Enter your mobile phone number and company name for better service. Go

jetjetd Lv5Posted 03 Jul 2022 00:57
I hope everyone will find my guide useful.
RegiBoy Lv5Posted 20 Jul 2022 16:38
We have a VMware server and ISO installation is what we need.
Faisal P Posted 13 Oct 2022 21:54
Thank you very much for the information ...
Zonger Lv4Posted 24 Oct 2022 03:18
Thanks for sharing
Alizaan Lv2Posted 17 Jun 2023 21:03
Thanks for sharing
RegiBoy Lv5Posted 22 Jun 2023 15:17
The Sangfor aCloud installation guide provides step-by-step instructions for a seamless setup.
Adonis001 Lv3Posted 22 Jun 2023 15:19
It includes troubleshooting tips and common issues to help overcome any challenges.
NeTSec Lv3Posted 22 Jun 2023 15:27

It covers the installation process for both on-premises and cloud environments.
Yboom Lv2Posted 22 Jun 2023 15:30
It provides guidelines for monitoring and managing the aCloud infrastructure.