Make Forward IP Public with port

Newbie871041 Lv1Posted 2022-May-29 08:53

I use Public IP to setup Sangfor on the WAN so I can access it anywhere. and I try to forward with a Private IP from Sangfor which can be accessed via a Public IP. whether the way I did is correct or is there another way. Please help.
202.xxx.xxx.xxx My ip Public
10.84.19.219     My ip private

jetjetd has solved this question and earned 10 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

I am thinking you are testing it within the network. Can you try accessing it outside of your network since this is public IP already or you can let your colleague try accessing it from their home instead.
Is this answer helpful?
Darjo Lv1Posted 2022-May-30 00:40
  
which deployment of sangfor u used, route mode or bridge?
Faisal P Posted 2022-May-30 10:40
  
The way you did is correct
rivsy Lv5Posted 2022-May-30 11:51
  
Your configuration/setup is correct. Try to test your first configuration before deploying in the end-user
regidorreyes Lv5Posted 2022-Jun-03 18:39
  

The configuration/setup is right and try port 80 or 443
jetjetd Lv5Posted 2022-Jun-03 18:43
  
I am thinking you are testing it within the network. Can you try accessing it outside of your network since this is public IP already or you can let your colleague try accessing it from their home instead.
ArsalanAli Lv3Posted 2022-Jun-04 18:25
  
Configure the policy , to allow this LAN IP

I Can Help:

Change

Moderator on This Board

1
3
5

Started Topics

Followers

Follow

Board Leaders