How to add NFV license to Tenants?

Park Bo Gart Lv2Posted 14 Jan 2020 14:29

Last edited by Park Bo Gart 14 Jan 2020 15:15.

in aCMP, how to add NFV license to Tenants? or rather, could we enable NFV for Tenants?

rivsy has solved this question and earned 10 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

After the aCloud clusteris managed by aCMP, the virtual network device can only be deployed on the aCMP. NFV device require to authorize through aCMP so that the advance function in NFV can be used normally.

1. Select "System" --> "Licensing" --> "NFVLicensing Overview" to check which device is not authorize. Then select unauthorized device and click "Licensing" button.

2. Select unauthorize NFV device and click "Licensing" which locate on the right side. After assigning corresponding authorization, click OK.

3. The authorized NFV can be view, edit and deallocated

acmp 1.png (92.5 KB, Downloads: 572)

acmp 1.png

acmp 2.png (49.46 KB, Downloads: 577)

acmp 2.png

acmp 3.png (58.31 KB, Downloads: 577)

acmp 3.png

acmp 4.png (38.8 KB, Downloads: 569)

acmp 4.png
Is this answer helpful?
ezra Lv2Posted 15 Jan 2020 16:58
  
listen                                                                                            
chalid112 Lv1Posted 23 Jan 2020 12:13
  
UP, i need know it
Park Bo Gart Lv2Posted 23 Jan 2020 13:24
  
up up. let's wait for the experts to answer.
MChalidA Lv1Posted 04 Feb 2020 12:15
  
Pak Aprianto kemana nih , suhu
rivsy Lv5Posted 06 Jun 2022 13:45
  
After the aCloud clusteris managed by aCMP, the virtual network device can only be deployed on the aCMP. NFV device require to authorize through aCMP so that the advance function in NFV can be used normally.

1. Select "System" --> "Licensing" --> "NFVLicensing Overview" to check which device is not authorize. Then select unauthorized device and click "Licensing" button.

2. Select unauthorize NFV device and click "Licensing" which locate on the right side. After assigning corresponding authorization, click OK.

3. The authorized NFV can be view, edit and deallocated

acmp 1.png (92.5 KB, Downloads: 572)

acmp 1.png

acmp 2.png (49.46 KB, Downloads: 577)

acmp 2.png

acmp 3.png (58.31 KB, Downloads: 577)

acmp 3.png

acmp 4.png (38.8 KB, Downloads: 569)

acmp 4.png
Faisal P Posted 06 Jun 2022 14:41
  
An NFVI tenant cannot interfere with the operations of another tenant, nor can one VNF interfere with another.
jetjetd Lv5Posted 06 Jun 2022 15:02
  
You can enable NFV for tenants using aCMP.
KatAndres Lv2Posted 07 Jun 2022 13:35
  
After the aCloud clusteris managed by aCMP, the virtual network device can only be deployed on the aCMP. NFV device require to authorize through aCMP so that the advance function in NFV can be used normally.

1. Select "System" --> "Licensing" --> "NFVLicensing Overview" to check which device is not authorize. Then select unauthorized device and click "Licensing" button.

2. Select unauthorize NFV device and click "Licensing" which locate on the right side. After assigning corresponding authorization, click OK.

3. The authorized NFV can be view, edit and deallocated
Farina Ahmed Lv5Posted 09 Jun 2022 14:15
  
Follow these three basic steps;

1. Select "System" --> "Licensing" --> "NFVLicensing Overview" to check which device is not authorize. Then select unauthorized device and click "Licensing" button.

2. Select unauthorize NFV device and click "Licensing" which locate on the right side. After assigning corresponding authorization, click OK.

3. The authorized NFV can be view, edit and deallocated,

I Can Help:

Change

Moderator on This Board

2
20
0

Started Topics

Followers

Follow

Board Leaders