aSAN connectivity

How can Fibre Channel be used in a aSAN environment? Does it utilize FCoE?
and does Sangfor support FCoE

Hi,
In a Storage Area Network (SAN) environment, Fibre Channel (FC) is a primary protocol used for high-speed data transfer, offering low-latency, high-bandwidth connectivity that is essential for enterprise-level storage solutions. It operates over dedicated Fibre Channel networks, often involving specialized switches and HBAs (Host Bus Adapters).

Fibre Channel over Ethernet (FCoE) is a protocol that enables Fibre Channel to run directly over Ethernet, allowing data and storage traffic to share a single Ethernet-based network infrastructure. This is particularly useful in converged data center environments where reducing cabling and consolidating infrastructure are important. However, FCoE requires special support from network equipment to handle lossless Ethernet traffic, as FCoE frames must be delivered with minimal packet loss, similar to traditional Fibre Channel networks.

Regarding Sangfor, it primarily specializes in network security, WAN optimization, and hyper-converged infrastructure. However, Sangfor solutions are not typically associated with support for FCoE, as their products tend to focus more on virtualization, application delivery, and security. For dedicated FCoE support, you would usually rely on traditional storage and network vendors like Cisco, Brocade, or Huawei, which have specialized products for converged networks supporting FCoE.

Hi, Fibre Channel is used to connect hci nodes themselves by using a switch to achieve performance on storage and real time data sync across cluster members.  I suggest you to take a look on these manuals (replace xx with tt to make link clickable): hxxps://knowledgebase.sangfor.com/detailPage?articleData=%7B%22articleType%22%3A1,%22articleId%22%3A%22155227af58e84506b83156e6b3e32732%22,%22keyword%22%3A%22hci%20associate%22%7D

Thanks for your answer. I got it.