Doubts SOC

Guys, if you can help I would appreciate it.
If I have more than two NGAF in the same company, I can see the incidents of all equipment in the SOC tab or I have to open two or more consoles to check the incidents.
Example, I have an NGAF 3100 on one floor and on each floor below, I have an NGAF 1050, how can I manage them all in a single console?
Can anyone tell me if this is possible?
Thanks

Absolutely! Managing multiple NGAF devices from a single console is definitely possible. Here are two common approaches depending on your specific NGAF setup:

1. Centralized Management System (CMS):

Many NGAF vendors offer a Centralized Management System (CMS) that allows you to manage multiple devices from a single interface. This provides a unified view of all your NGAF devices' security incidents in the SOC tab.
Check with your NGAF vendor to see if they offer a CMS solution compatible with your NGAF 3100 and NGAF 1050 models. These systems typically involve installing the CMS software on a dedicated server and then configuring your NGAF devices to report to it.
2. Multi-device Management Features:

Some NGAF devices themselves might have built-in multi-device management features. This could involve designating one NGAF device as the "master" and others as "slaves" or "managed devices." The master device would then provide a consolidated view of incidents from all managed devices.
Consult your NGAF device manuals or the vendor's website to see if your specific models support this functionality.
Here's a breakdown of your scenario:

You have an NGAF 3100 (likely on the top floor) and NGAF 1050s on floors below.
Ideally, you'd want a central console to view incidents from all devices.
Possible Solutions:

If your vendor offers a CMS, installing it would allow you to manage all NGAF devices (3100 and 1050s) from a single console and view incidents in the SOC tab.
If a CMS isn't available, check if your NGAF models support built-in multi-device management. You could potentially configure the NGAF 3100 as the master and manage the 1050s from there.
I recommend reviewing your NGAF vendor's documentation or contacting their support to determine the most suitable solution for managing your specific devices from a single console.

Based on this issue, we recommend that you contact Sangfor's local team for assistance in finding a suitable solution.

In Sangfor NGAF, you can manage multiple NGAF devices from a single console using the Centralized Management feature. This allows you to aggregate and view security incidents, logs, and configurations from multiple NGAF devices in one centralized location.

You need to set up a Centralized Management server and configure all your NGAF devices to communicate with this server. Once configured, you can access the Centralized Management console to view and manage security incidents, logs, and configurations of all your NGAF devices in one place.

This enables you to have a holistic view of the security posture across all your NGAF devices and facilitates centralized management and monitoring for enhanced security operations.

Hi
The console port allows you to access and manage the device even if the network or web interfaces are not accessible.

Hi,

You can manage multiple Sangfor NGAF devices in a single console through Sangfor Central Management System or  CMS.  It is a centralized management platform that allows you to configure, monitor, and troubleshoot multiple Sangfor devices, including NGAF firewalls, from a single console.

Hi,

You can use SOC.
A Security Operations Center – or SOC – is the cyber hub of any organization. It is the team of experts that controls, monitors, and analyzes all the data that flows through your company’s network

To manage multiple NGAF devices (NGAF 3100 and NGAF 1050) in a single console, you can utilize the Sangfor Security Operations Center (SOC) platform. The SOC provides a centralized management interface for multiple NGAF devices, allowing you to monitor and manage incidents across all your devices from a single console.

Hi, i think you might take a look on Platform-X if you wanto to manage Sangfor resources.
Here’s a general overview about managing on Platform-X:

1) Grouping Devices: You can group devices based on their function, location, or any other criteria that suits your organization’s needs. For example, you might have separate groups for devices in different geographic locations, or for devices serving different departments within your organization1.
2) Applying Policies: Once devices are grouped, you can apply policies to the entire group instead of configuring each device individually. This can save time and ensure consistency across devices1.
3) Monitoring and Management: Device groups can also make monitoring and management easier. You can view the status of all devices in a group at a glance, and perform administrative tasks for the entire group1.
4) Troubleshooting and Analysis: If an issue arises, being able to isolate and analyze a group of devices can make troubleshooting more efficient

HiHi,

The Sangfor CM is an innovative management platform that streamlines multi-branch operations for enterprises.

Please refer to the attached file for the Sangfor Central Manager Brochure for your Ref.