Does NGAF support IKE ID

Nitipat Lv1Posted 06 Jun 2018 18:20

We need to confirm does NGAF support IKE ID via Ipsec site - to - site VPN
IKE ID.jpg

FAEoTONGoTH has solved this question and earned 20 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

Hi sir,
     you can find Local ID and Peer ID at

VPN -> IPsec VPN  -> IPsec VPN -> Phase I -> add  -> advance -> Mode -> Aggressive mode

Screen Shot 2018-06-11 at 10.45.06.png
Is this answer helpful?
CTI LS Posted 06 Jun 2018 18:23
  
Hi,

Currently Sangfor NGAF supports IKEv1 only.
Nitipat Lv1Posted 06 Jun 2018 18:24
  
How to configure IKE ID because this feature should be in the IKEv1
Nitipat Lv1Posted 06 Jun 2018 18:28
  
The IKE identification (IKE ID) is used for validation of VPN peer devices during IKE negotiation. The IKE ID received by the SRX Series device from a remote peer can be an IPv4 or IPv6 address, a hostname, a fully qualified domain name (FQDN), a user FQDN (UFQDN), or a distinguished name (DN). The IKE ID sent by the remote peer needs to match what is expected by the SRX Series device. Otherwise, IKE ID validation fails and the VPN is not established.
CTI LS Posted 07 Jun 2018 15:39
  
Hi,

IKEv1 is the most common IPsec VPN. I think the IKE ID is not in IKEv1.
FAEoTONGoTH Lv1Posted 11 Jun 2018 11:49
  
Hi sir,
     you can find Local ID and Peer ID at

VPN -> IPsec VPN  -> IPsec VPN -> Phase I -> add  -> advance -> Mode -> Aggressive mode

Screen Shot 2018-06-11 at 10.45.06.png

I Can Help:

Change

Moderator on This Board

0
4
0

Started Topics

Followers

Follow

Board Leaders