WANO Connectivity

Shane Lv1Posted 13 Dec 2018 11:09

Last edited by Shane 13 Dec 2018 11:44.


I configured 2 WANO devices from different network, good thing the vpn connectivity is okay, the 2 devices are connected, my problem is how can i ping the HQ's laptop if i am in the network Branch? how to troubleshoot?
227735c11d55e83ffe.png 85295c11d5942e71a.png

By solving this question, you may help 56 user(s).

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

Michael So Lv1Posted 13 Dec 2018 14:07
Please check your PC's windows firewall. Please disable it for a while then check. Including the Public Network Firewall
Shane Lv1Posted 13 Dec 2018 15:19
Hi Michael,

i already turned off my pc's firewall but still cant. ping to the HQ's pc. is it in my pc only or with the HQ's pc also to be turned off?
below is my sample topology, I am on the Branch PC.

136375c12080e531fc.png 131665c12083777ab9.png 265325c1213809c130.png
CTI TF Lv1Posted 13 Dec 2018 16:45
Hi, are you able to ping HQ laptop with the HQ PC?
If the PC in HQ also unable to ping HQ laptop, it will be impossible for Branch to ping.
By default ping is not allow for the Windows.
Kindly make sure the PC you wish to ping is allow for ping(ICMP).
CTI TF Lv1Posted 13 Dec 2018 18:13
In this case, kindly check for the local subnet configuration.
You may try to add the IP segment into the local subnet.
Add HQ segment in HQ WANO and add Branch segment in Branch WANO.

I Can Help:


Board Leaders