Zonger Lv4Posted 05 Mar 2024 20:29
  
Please follow below steps to troubleshoot the issue with the 10Gbps bandwidth throughput between Windows Server VMs in your Sangfor HCI environment.

1. Verify network configuration:
        * Check if the network adapters in your Windows Server VMs are configured for 10Gbps speed and full-duplex mode.
        * Ensure that the network adapters are compatible with the 10Gbps network speed.
2. Update network card drivers/adapters:
        * Check for any available updates for the network card drivers/adapters on the Windows Server VMs.
        * Install the latest drivers/adapters to ensure optimal network performance.
3. Test network connectivity:
        * Use tools like Ping, Ping Plotter, or Wireshark to test the network connectivity between the VMs. This will help identify if there are any connectivity issues between the VMs.
4. Check network congestion:
        * Monitor the network traffic and resource utilization on the host servers and network switches. High congestion might limit the throughput between the VMs.
5. Verify Sangfor HCI configuration:
        * Check the network configuration and settings on the Sangfor HCI cluster, including MTU size, jumbo frames, and network QoS settings.
        * Ensure that the network settings on the HCI cluster are optimized for 10Gbps throughput.
6. Test with a different OS:
        * If possible, test the throughput between VMs running a different operating system to rule out any OS-specific issues.

Hope, you should be able to identify and resolve the issue with the 10Gbps bandwidth throughput between your Windows Server VMs in the Sangfor HCI environment.

I Can Help:

Change

Moderator on This Board

3
0
2

Started Topics

Followers

Follow

2
0
0

Started Topics

Followers

Follow

2
20
0

Started Topics

Followers

Follow

Board Leaders