pmateus Lv2Posted 06 Feb 2024 19:01
  
The console port on Sangfor NGAF is a serial port that allows you to access the NGAF device using a terminal emulator software and a console cable. You can use the console port to perform initial configuration, troubleshooting, or recovery tasks on the NGAF device.

To access the NGAF device using the console port, you need the following:
•  A PC with a serial port or a USB to serial adapter/cable
•  A console cable compatible with Sangfor NGAF device
•  A terminal emulator software such as Putty, Tera Term, etc.
You also need to set the terminal emulator software to the following settings:
•  Baud rate: 115200 (unless already changed)
•  Data bits: 8
•  Parity: None
•  Stop bits: 1
•  Flow control: None

Then, you need to connect the console cable to the console port on the NGAF device and the PC, and launch the terminal emulator software. You should see a login prompt on the terminal window.

I Can Help:

Change

Moderator on This Board

0
2
4

Started Topics

Followers

Follow

67
14
3

Started Topics

Followers

Follow

3
0
2

Started Topics

Followers

Follow

1
131
3

Started Topics

Followers

Follow

Board Leaders