1. Access the Console:

    Open a web browser and navigate to the IP address or hostname of your Sangfor VPN console.
    Log in using your administrator credentials.

2. Locate VPN Configuration:

    Find the section dedicated to VPN configuration. Look for terms like "Branch Office VPN," "Site-to-Site VPN," or "Remote Access VPN."

3. Initiate Branch Creation:

    Look for a button or link labeled "Add Branch," "Create New Branch," or similar.
    Click it to start the branch creation process.

4. Provide Branch Information:

    Enter the required details for the new branch, typically:
        Branch Name: A descriptive name for easy identification.
        Public IP Address: The branch's public IP address.
        Pre-Shared Key: A strong, shared secret for authentication.
        Local Network Subnets: The IP ranges of the branch's local networks that will be accessible through the VPN.

5. Configure Additional Settings (if applicable):

    Encryption: Select desired encryption algorithms (e.g., AES-256).
    Authentication: Choose authentication methods (e.g., pre-shared key, certificates).
    Routing: Configure routing options for traffic between branches.
    Bandwidth Management: Set up bandwidth controls or restrictions if needed.

6. Save and Apply Changes:

    Review all settings carefully.
    Save the configuration and apply the changes to activate the new branch.

7. Test Connectivity:

    Verify VPN connectivity between the new branch and other sites by attempting to access resources across the VPN.
    Use tools like ping or traceroute to test connections.

1. Access the Console:

    Open a web browser and navigate to the IP address or hostname of your Sangfor VPN console.
    Log in using your administrator credentials.

2. Locate VPN Configuration:

    Find the section dedicated to VPN configuration. Look for terms like "Branch Office VPN," "Site-to-Site VPN," or "Remote Access VPN."

3. Initiate Branch Creation:

    Look for a button or link labeled "Add Branch," "Create New Branch," or similar.
    Click it to start the branch creation process.

4. Provide Branch Information:

    Enter the required details for the new branch, typically:
        Branch Name: A descriptive name for easy identification.
        Public IP Address: The branch's public IP address.
        Pre-Shared Key: A strong, shared secret for authentication.
        Local Network Subnets: The IP ranges of the branch's local networks that will be accessible through the VPN.

5. Configure Additional Settings (if applicable):

    Encryption: Select desired encryption algorithms (e.g., AES-256).
    Authentication: Choose authentication methods (e.g., pre-shared key, certificates).
    Routing: Configure routing options for traffic between branches.
    Bandwidth Management: Set up bandwidth controls or restrictions if needed.

6. Save and Apply Changes:

    Review all settings carefully.
    Save the configuration and apply the changes to activate the new branch.

7. Test Connectivity:

    Verify VPN connectivity between the new branch and other sites by attempting to access resources across the VPN.
    Use tools like ping or traceroute to test connections.