how to add a new branch for vpn on bbc 10

how to add a new branch for vpn on bbc

Go to Branches --> Add then add the parameters and click ok

Screenshot is also attached

Hi,

Please find below the related issue for your reference:

https://community.sangfor.com/forum.php?mod=viewthread&tid=9541&highlight=

you may try this

1 Select the WAN interface
2 In Basic setting select Wan Lines and VPN subnets
3 In Local Users , Add VPN users , also the second HQ
4 VPN connection Add the user name second HQ  

Primary IP and Secondary IP is your Primary and Secondary IP (do not input 2nd HQ IP)

Go to branches icon and select add new branches.

To add a new branch for VPN on Sangfor's Browser-Based Console (BBC), you would typically log in to the BBC interface and navigate to the VPN configuration section. Within the VPN settings, there should be an option to add a new branch or site. You would need to input the relevant details for the new branch, such as its name, IP address, and authentication information. Ensure that the VPN settings align with your network requirements and security policies.

Hi, to add a new branch to an existing VPN on Sangfor, you can follow the steps below:

1) Go to Network > IPsecVPN > VPN Connections.
2) Click on Add to add a new connection.
3) A new window will appear. Fill in the name, HQ primary agent, username, and password that you just created.
4) Click on Save and then click on OK to save the configuration .

1. Access the Console:

    Open a web browser and navigate to the IP address or hostname of your Sangfor VPN console.
    Log in using your administrator credentials.

2. Locate VPN Configuration:

    Find the section dedicated to VPN configuration. Look for terms like "Branch Office VPN," "Site-to-Site VPN," or "Remote Access VPN."

3. Initiate Branch Creation:

    Look for a button or link labeled "Add Branch," "Create New Branch," or similar.
    Click it to start the branch creation process.

4. Provide Branch Information:

    Enter the required details for the new branch, typically:
        Branch Name: A descriptive name for easy identification.
        Public IP Address: The branch's public IP address.
        Pre-Shared Key: A strong, shared secret for authentication.
        Local Network Subnets: The IP ranges of the branch's local networks that will be accessible through the VPN.

5. Configure Additional Settings (if applicable):

    Encryption: Select desired encryption algorithms (e.g., AES-256).
    Authentication: Choose authentication methods (e.g., pre-shared key, certificates).
    Routing: Configure routing options for traffic between branches.
    Bandwidth Management: Set up bandwidth controls or restrictions if needed.

6. Save and Apply Changes:

    Review all settings carefully.
    Save the configuration and apply the changes to activate the new branch.

7. Test Connectivity:

    Verify VPN connectivity between the new branch and other sites by attempting to access resources across the VPN.
    Use tools like ping or traceroute to test connections.

SANGFOR SSL VPN provides remote user with extraordinary access performance and experience by embedding acceleration technologies without additional license fee

First, choose the WAN interface.
2 Choose VPN subnets and Wan Lines in the Basic configuration.
3. Add VPN users in Local Users and the second Headquarters
4 Add the user name "second HQ" to the VPN connection.