A point to point link in Sangfor NGAF is a dedicated link between two devices. It is a secure and reliable way to connect two networks, such as a branch office to the headquarters or a server to a storage device.

In Sangfor NGAF, a point to point link can be implemented using IPsec VPN or GRE tunnels. IPsec VPN is a secure protocol that encrypts all traffic between the two devices. GRE tunnels are a less secure option, but they can be used to connect devices that do not support IPsec.

To configure a point to point link in Sangfor NGAF, you will need to create a new interface and specify the type of link you want to create. For IPsec VPN, you will need to specify the encryption algorithm and the pre-shared key. For GRE tunnels, you will need to specify the tunnel destination address.

Once the interface is created, you will need to add the IP addresses of the two devices to the interface. You can also configure other settings, such as the MTU and the traffic shaping.

Point to point links can be a valuable tool for improving the security and reliability of your network. They can also be used to reduce latency and improve performance.

Here are some of the benefits of using point to point links in Sangfor NGAF:

• Increased security: Point to point links are more secure than shared links, as all traffic is encrypted.
• Improved reliability: Point to point links are less susceptible to interference and congestion than shared links.
• Reduced latency: Point to point links can reduce latency by eliminating the need to route traffic through multiple devices.
• Improved performance: Point to point links can improve performance by providing a dedicated connection between the two devices.
  
  

If you are looking for a secure, reliable, and efficient way to connect two devices, then a point to point link in Sangfor NGAF is a good option.

A point to point link in Sangfor NGAF is a dedicated link between two devices. It is a secure and reliable way to connect two networks, such as a branch office to the headquarters or a server to a storage device.

In Sangfor NGAF, a point to point link can be implemented using IPsec VPN or GRE tunnels. IPsec VPN is a secure protocol that encrypts all traffic between the two devices. GRE tunnels are a less secure option, but they can be used to connect devices that do not support IPsec.

To configure a point to point link in Sangfor NGAF, you will need to create a new interface and specify the type of link you want to create. For IPsec VPN, you will need to specify the encryption algorithm and the pre-shared key. For GRE tunnels, you will need to specify the tunnel destination address.

Once the interface is created, you will need to add the IP addresses of the two devices to the interface. You can also configure other settings, such as the MTU and the traffic shaping.

Point to point links can be a valuable tool for improving the security and reliability of your network. They can also be used to reduce latency and improve performance.

Here are some of the benefits of using point to point links in Sangfor NGAF:

• Increased security: Point to point links are more secure than shared links, as all traffic is encrypted.
• Improved reliability: Point to point links are less susceptible to interference and congestion than shared links.
• Reduced latency: Point to point links can reduce latency by eliminating the need to route traffic through multiple devices.
• Improved performance: Point to point links can improve performance by providing a dedicated connection between the two devices.
  
  

If you are looking for a secure, reliable, and efficient way to connect two devices, then a point to point link in Sangfor NGAF is a good option.