Windows Server 2022 on HCI Sangfor cannot connect network

Arif Lv1Posted 15 Jun 2023 10:32

does anyone have the same problem with me?
I installed Windows Server 2022 on HCI Sangfor, I using static ip but cannot connected network.

my question is windows server 2022  cannot compatible on HCI Sangfor ?

CTI TF has solved this question and earned 10 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

Hi, kindly ensure that the Edge interface has been configured correctly with the corresponding physical interface and vlan settings.
Other than that, you may double check whether the IP configuration on the Windows Server 2022 is correct.
Lastly, ensure that the VM NIC has been enabled and connected to the Edge.
Is this answer helpful?
Naomi Lv3Posted 21 Jun 2023 16:53
  
It is recommended to reach out to the technical support teams of both Windows Server 2022 and HCI Sangfo
NeTSec Lv3Posted 21 Jun 2023 16:52
  
Use ping/tracert to test network connectivity.
noime Lv3Posted 21 Jun 2023 16:51
  
Just check if their are missing drivers in the network.
RegiBoy Lv5Posted 21 Jun 2023 16:50
  
Verify correct network settings (IP, subnet mask, gateway, DNS).
MTR Lv2Posted 21 Jun 2023 16:16
  
Verify the network configuration: Double-check the IP address, subnet mask, gateway, and DNS settings configured on your Windows Server 2022. Ensure they match the network requirements of your environment.

Verify physical connectivity: Ensure that the network cable is securely connected to the appropriate network interface on the HCI nodes. You may also try using a different cable or port to rule out any physical connectivity issues.

Check network settings on Sangfor HCI: Review the networking configuration and settings within the Sangfor HCI solution. Ensure that it aligns with the network setup you're using.

Verify network access: Ensure that the network you are connecting to allows access for the configured static IP. Check firewall settings or any network-level restrictions that might be blocking the connection.

Update drivers and firmware: Check for any available updates for the network drivers and firmware on the HCI nodes. Outdated or incompatible drivers could potentially cause connectivity issues.
MTR Lv2Posted 21 Jun 2023 16:08
  
Verify the network configuration: Double-check the IP address, subnet mask, gateway, and DNS settings configured on your Windows Server 2022. Ensure they match the network requirements of your environment.

Verify physical connectivity: Ensure that the network cable is securely connected to the appropriate network interface on the HCI nodes. You may also try using a different cable or port to rule out any physical connectivity issues.

Check network settings on Sangfor HCI: Review the networking configuration and settings within the Sangfor HCI solution. Ensure that it aligns with the network setup you're using.

Verify network access: Ensure that the network you are connecting to allows access for the configured static IP. Check firewall settings or any network-level restrictions that might be blocking the connection.

Update drivers and firmware: Check for any available updates for the network drivers and firmware on the HCI nodes. Outdated or incompatible drivers could potentially cause connectivity issues.
Bebe_Bote Lv3Posted 20 Jun 2023 16:23
  
Just recreate the vm and double check the network settings of the vm.
Kalem Lv3Posted 20 Jun 2023 16:09
  
This must work in Windows Server 2022. Try to recreate the VM.
jetjetd Lv5Posted 20 Jun 2023 15:49
  
Its compatible with Windows Server 2022. Just check if their are missing drivers in the network.

I Can Help:

Change

Moderator on This Board

3
0
2

Started Topics

Followers

Follow

2
0
0

Started Topics

Followers

Follow

2
20
0

Started Topics

Followers

Follow

Board Leaders