Sangfor Community»Categories Product aCloud (HCI) Create virtual storage issue

Create virtual storage issue

views: 5604 | comments: 21 | added to Favorites 0
Lights on | 提示:支持键盘翻页<-左 右->
    组图打开中,请稍候......
Created: 22 May 2023 17:22

Summary:

Hello Everyone, I want to virtual storage but giving error for SSD disks. How can i bypass this issue. Is it possible ?

Reply

CTI TF Posted 10 Jul 2023 17:55
For your information, Sangfor HCI need to use enterprise level hard disk to ensure business performance and reliability.
Kindly ensure the disk is enterprise level and the performance meet the minimum requirements(30k and above).
If the disk is enterprise level, you may contact Sangfor support engineer to further verify.
Dincoso Posted 30 May 2023 13:23
Hello Everyone,

Thank you so much all for the replies. I did contact to hardware vendor. I will inform to all when information from support.
CLELUQMAN Posted 30 May 2023 09:09
u cannot bypass it.
Bebe_Bote Posted 30 May 2023 00:29
Verify if your SSD disks is compatible with the hardware you plugged in to the said disks.
jetjetd Posted 30 May 2023 00:14
Kindly verify the compatibility of your SSD disks to the hardware itself.
Farina Ahmed Posted 29 May 2023 16:05
To bypass an error when trying to create virtual storage with SSD disks:

Check compatibility of SSD disks with the virtual storage system.
Update firmware and drivers for the SSD disks.
Verify disk health using diagnostic tools.
Format the SSD disks according to the virtual storage system requirements.
Review and configure the correct disk type (SSD) in the storage system settings.
Ensure there are no limitations on the number or capacity of SSD disks.
Contact vendor support for further assistance if the issue persists.
Newbie517762 Posted 29 May 2023 15:18
Last edited by Newbie517762 29 May 2023 15:22.

No, it is not possible.  

For Cache disk and data disk: Solid State Disks (SSD) have excellent IOPS and throughput capacity, and common data center-grade SATA SSD in the market has IOPS over 50,000
Garfield Posted 29 May 2023 15:17
this is not possible
NeTSec Posted 29 May 2023 15:16
To check that the SSDs are working correctly, test them on a real system. Examine the SSD for any firmware upgrades or particular SSD settings that may need to be changed.
Noah19 Posted 29 May 2023 15:13
Consult Vendor Support: If you have gone through the above steps and the issue persists,