IGMP Multicast

Ginalyn Lv2Posted 08 Mar 2023 23:11

We need to have a router capable of IGMP (Multicast) that can route IP Radio Communication. How to configure IAG to enable IGMP.

CTI_JianJie has solved this question and earned 10 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

Yes, Sangfor IAG supports IGMP multicast transparency in the network; the packets will passthrough the IAG bridge interface.
Is this answer helpful?
Faisal Piliang Posted 09 Mar 2023 11:11
  
Internet Group Management Protocol (IGMP) establishes and maintains the multicast group memberships between a Layer 3 multicast device and the hosts on the directly connected subnet.
IGMPv1 manages multicast group memberships based on the query and response mechanism.
All routers that run IGMP on the same subnet can get IGMP membership report messages (called reports) from hosts. However, only one router can act as the IGMP querier to send IGMP query messages (called queries). The querier election mechanism determines which router acts as the IGMP querier on the subnet.

rivsy Lv5Posted 13 Mar 2023 09:49
  
You can set the IGMP to the managed switch you are using.
Jhazz Lv3Posted 13 Mar 2023 09:55
  
You can use TPLink router AX1500 for cost effective configuration
ArC Lv2Posted 13 Mar 2023 10:21
  
IGMP configuration is on the router or managed switch side
AndrewForti Lv2Posted 13 Mar 2023 10:23
  
HeavT Lv2Posted 13 Mar 2023 10:35
  
The best way is to get a enterprise grade router that can support multicast then configure it to support the Sangfor IAG
InfoMan Lv2Posted 13 Mar 2023 11:21
  
Last edited by InfoMan 13 Mar 2023 11:22.

Configuration is in the router or in the switch
JJ Lv2Posted 13 Mar 2023 11:28
  
Please check the pages 562 unwards for the configuration
SherylCor Lv2Posted 13 Mar 2023 11:35
  
Last edited by SherylCor 15 Mar 2023 08:58.

Below is the configuration steps by steps:
Please follow the video instruction only not the language:

I Can Help:

Change

Moderator on This Board

11
54
1

Started Topics

Followers

Follow

15
21
3

Started Topics

Followers

Follow

Board Leaders