What is Pass Thrrough

Fisher Lv2Posted 15 Jan 2023 07:55

In Bridge Mode there is a Pass Through. What is function of this?

rivsy has solved this question and earned 10 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

The bridge mode and IP passthrough mode both provide similar functionality where entire traffic is pass-through the gateway and the public IP is assigned to the client router behind the gateway. The bridge mode does not terminate the traffic at the gateway while the IP passthrough does terminate the traffic at the gateway. In order for ISPs to connect to the gateway, the IP passthrough mode should be used instead of the bridge mode.
Is this answer helpful?
FahmiAzlanMY Lv1Posted 27 Jan 2023 15:50
  
Troubleshooting tools, to identify traffic root cause.
Taha Lv2Posted 22 Jan 2023 14:15
  
Pass-through Mode describes a gateway which has its LAN DHCP and Firewall manually disabled through the user interface. This allows traffic to pass-through towards a routing device and can be used if the customer has a Static IP address
It does the same as bridge mode
sumran Lv2Posted 22 Jan 2023 14:00
  
Pass-through Mode describes a gateway which has its LAN DHCP and Firewall manually disabled through the user interface. This allows traffic to pass-through towards a routing device and can be used if the customer has a Static IP address.
Faisal P Posted 18 Jan 2023 12:17
  
The bridge mode divides one physical line into multiple virtual lines for
traffic management channel configuration
kmrnliaqat Lv3Posted 16 Jan 2023 21:38
  

Pass-Through is  combination of routed and bridge mode
jetjetd Lv5Posted 16 Jan 2023 17:59
  
Passthrough mode allows you to assign a new public and dynamic IP address to one device on your local network.
Luih Miranda Lv3Posted 16 Jan 2023 14:12
  
IP pass-through works essentially the same as the bridged mode where you can use your own router behind the ISP gateway. However, in IP pass-through mode the signal is terminated while bridge mode signal is not terminated at the gateway and allows the ISP to connect to the gateway with its own IP.
Farina Ahmed Lv5Posted 16 Jan 2023 14:00
  
The bridge mode does not terminate the traffic at the gateway while the IP passthrough does terminate the traffic at the gateway. In order for ISPs to connect to the gateway, the IP passthrough mode should be used instead of the bridge mode
Imran Tahir Lv4Posted 16 Jan 2023 12:41
  
pass through ended at gateway
Newbie517762 Lv5Posted 16 Jan 2023 09:29
  
Last edited by Newbie517762 16 Jan 2023 14:20.

The IAG Bridge mode deployment support Hardward bypass function,
If the network is interrupted due to IAG failure, it can enable the hardware bypass function to resume network comunication.

I Can Help:

Change

Moderator on This Board

15
21
3

Started Topics

Followers

Follow

Board Leaders