MISMDS Lv3Posted 06 Jan 2023 15:20
  
configure it on the DHCP Section/Option
CyberDaeng Lv1Posted 07 Jan 2023 12:13
  
1. Go to POLICIES > AUTHENTICATION > Authentication Policy

2. Now check Enable User Authentication

3. Then Add Policy by clicking the Add Buttom


Dont forget to set the authentication zone as well...

Screenshot 2023-01-07 111110.jpg (132.45 KB, Downloads: 242)

Screenshot 2023-01-07 111110.jpg
soneosansan Lv3Posted 07 Jan 2023 23:14
  

Go to POLICIES > AUTHENTICATION > Authentication Policy. Then Add Policy by clicking the Add Buttom
nobitachou Lv2Posted 07 Jan 2023 23:16
  
*. Go to POLICIES > AUTHENTICATION > Authentication Policy

* Now check Enable User Authentication

* Then Add Policy by clicking the Add Buttom
Jigen87 Lv3Posted 07 Jan 2023 23:17
  
It is not in authentication but instead it is on the DHCP Section
ZoroZoro Lv3Posted 07 Jan 2023 23:17
  
Go to the DHCP and define a pool
Define a fixed IP that binds the Mac address
Imran Tahir Lv4Posted 09 Jan 2023 12:12
  
yes do it from
DHCP
jetjetd Lv5Posted 09 Jan 2023 15:45
  
Go to the DHCP section and from there you can see an option for binding the MAC address into a specific IP.
Farina Ahmed Lv5Posted 09 Jan 2023 17:06
  
For that all you need to have a static IP that can be used and bind it with the Mac-Address of any machine. Every printer equipped with a network interface card has a Media Access Control address. A unique MAC address identifies every device attached to a network. When you need to filter MAC addresses on your router or identify individual networked appliances on your LAN, printers can be more problematic than personal computers. The MAC address for a Windows computer can be viewed by opening a command-line window and entering “ipconfig /all” at the prompt. Since most printers aren't equipped with keyboard input, you need to employ alternate methods to discover these addresses on your office network.
kmrnliaqat Lv3Posted 09 Jan 2023 19:28
  

DHCP > Click the Reserved IP Addresses and set a reserved IP address according to the MAC Address to bind the desired IP.

I Can Help:

Change

Moderator on This Board

1
131
3

Started Topics

Followers

Follow

18
8
0

Started Topics

Followers

Follow

Board Leaders