Binding the MAC to IP 3000

LucyHeart Lv3Posted 06 Jan 2023 13:15

How can I bind the Mac address to the desired IP?  I want our printer to have a fixed IP

RegiBoy has solved this question and earned 3020 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins, 3000 coins of bounty and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

Under DHCP > Click the Reserved IP Addresses and set a reserved IP address according to the MAC Address to bind the desired IP.
Is this answer helpful?
Newbie517762 Lv5Posted 13 Jan 2023 16:28
  
Thanks for your sharing.
Newbie308427 Posted 10 Jan 2023 10:12
  
dhcp reservation is a best practice
Faisal P Posted 10 Jan 2023 07:32
  
Make a Static IP Plan · Begin a device type IP range with a number ending in zero and end the range with a number ending in 9 · Increment ranges
kmrnliaqat Lv3Posted 09 Jan 2023 19:28
  

DHCP > Click the Reserved IP Addresses and set a reserved IP address according to the MAC Address to bind the desired IP.
Farina Ahmed Lv5Posted 09 Jan 2023 17:06
  
For that all you need to have a static IP that can be used and bind it with the Mac-Address of any machine. Every printer equipped with a network interface card has a Media Access Control address. A unique MAC address identifies every device attached to a network. When you need to filter MAC addresses on your router or identify individual networked appliances on your LAN, printers can be more problematic than personal computers. The MAC address for a Windows computer can be viewed by opening a command-line window and entering “ipconfig /all” at the prompt. Since most printers aren't equipped with keyboard input, you need to employ alternate methods to discover these addresses on your office network.
jetjetd Lv5Posted 09 Jan 2023 15:45
  
Go to the DHCP section and from there you can see an option for binding the MAC address into a specific IP.
Imran Tahir Lv4Posted 09 Jan 2023 12:12
  
yes do it from
DHCP
ZoroZoro Lv3Posted 07 Jan 2023 23:17
  
Go to the DHCP and define a pool
Define a fixed IP that binds the Mac address
Jigen87 Lv3Posted 07 Jan 2023 23:17
  
It is not in authentication but instead it is on the DHCP Section
nobitachou Lv2Posted 07 Jan 2023 23:16
  
*. Go to POLICIES > AUTHENTICATION > Authentication Policy

* Now check Enable User Authentication

* Then Add Policy by clicking the Add Buttom

I Can Help:

Change

Moderator on This Board

1
131
3

Started Topics

Followers

Follow

18
8
0

Started Topics

Followers

Follow

Board Leaders