Natsu Dragneel Lv3Posted 24 Oct 2022 14:31
  
If you want to access the local lan IP, you must configure Destination NAT.
isabelita Lv3Posted 24 Oct 2022 15:24
  
Is your Public IP dynamic?
BitCloud Lv3Posted 24 Oct 2022 15:27
  
Thanks for this question. I am also looking for the answer. Hope someone will answer correctly
Faisal P Posted 24 Oct 2022 16:09
  
Find your standard gateway (if its not simply 192.168.1.1) by opening a new CMD command line and entering
ipconfig /all
Open your router settings, log in and find the “port-forwarding” section and forward port 80 and 443 to your home server

arjay Lv3Posted 25 Oct 2022 09:00
  
WebAgent is the Public IP Address used for VPN Connection between sites
JasonCYP Lv1Posted 25 Oct 2022 10:51
  
If you don't have a public static IP of your HQ gateway and you wish to establish the Sangfor VPN between branch and HQ.

What you need to do is to apply the WebAgent account from Sangfor, this you need help from Sangfor TAC support, finally you will get the WebAgent Server IP which is hosted by Sangfor.

If you have static public ip, in the configration section, you don't need to do anything related to webagent, the ip you typing in is simply your HQ gateway static public IP.
Deorwine Lv2Posted 26 Oct 2022 10:41
  
If you have static public ip, in the configration section, you don't need to do anything related to webagent, the ip you typing in is simply your HQ gateway static public IP.
jetjetd Lv5Posted 29 Oct 2022 22:11
  
Webagent indicates the addresses of the dynamic IP addressing file in the web servers, including the
active Webagent address and standby Webagent address.

I Can Help:

Change

Moderator on This Board

1
131
3

Started Topics

Followers

Follow

18
8
0

Started Topics

Followers

Follow

Board Leaders