IAM not functioning

nobitachou Lv2Posted 16 Oct 2022 07:10

Last edited by nobitachou 18 Oct 2022 16:25.

If I were to bring up the IAM, all the PCs, Laptop, Mobile phones, Servers don't have internet and also I can't ping them even on local Lan.
Also when accessing all our switch is very slow and takes a lot of time to input a little command.

RegiBoy has solved this question and earned 20 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

Check if there were broadcast storm when you bring up the IAG. You must not plugged the LAN and WAN on the same switch.
Is this answer helpful?
Jdc Lv2Posted 25 Oct 2022 11:53
  

Please check if properly configure specially on the gateway address
MISMDS Lv3Posted 21 Oct 2022 11:28
  
Check if there were loop packets
MISMIS Lv3Posted 21 Oct 2022 11:20
  
Contact support team for this
Fuji12 Lv3Posted 21 Oct 2022 11:16
  
root of issue is a routing between your network elements
Jigen87 Lv3Posted 21 Oct 2022 11:11
  
please chec  gateway address
LucyHeart Lv3Posted 21 Oct 2022 11:09
  
Check if there were broadcast storm
soneosansan Lv3Posted 21 Oct 2022 11:04
  
You must not plugged the LAN and WAN on the same switch.
grayice499 Lv2Posted 20 Oct 2022 17:00
  
configure specially on the gateway address
Happpy Lv3Posted 20 Oct 2022 16:56
  
Check if there were broadcast storm when you bring up the IAG
babeshuka Lv3Posted 20 Oct 2022 16:50
  
Gateway problem issues

I Can Help:

Change

Moderator on This Board

15
21
3

Started Topics

Followers

Follow

Board Leaders