Geo Location Filtering

Racoon Lv2Posted 03 Oct 2022 10:06

A pleasant day everyone. Can you give me a step by step procedure on how to configure Geo Location blocking country of Russia.

RegiBoy has solved this question and earned 20 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

Follow this steps:

1. Goto Object > Network Object interface adds IP Address
2. Go to Policies > Access Control> GeoLocation Blocking
3. Verifythe validity of the policy.

You can also use my full guide article for Basic Geolocation Firewall -> https://community.sangfor.com/fo ... thread&tid=7439
Is this answer helpful?
Mikee Lv2Posted 17 Oct 2022 08:43
  

1. Go to Navigation bar, select [IP Address Database] and click on the Country/Region tab. Create new custom area.
Jay Taruc Lv2Posted 17 Oct 2022 08:27
  

Follow this steps:

1. Goto Object > Network Object interface adds IP Address
2. Go to Policies > Access Control> GeoLocation Blocking
3. Verifythe validity of the policy.
KarenD Lv2Posted 16 Oct 2022 13:55
  

1. Go to Navigation bar, select [IP Address Database] and click on the Country/Region tab. Create new custom area.
SteveD Lv2Posted 16 Oct 2022 13:42
  
1. Go to Navigation bar, select [IP Address Database] and click on the Country/Region tab. Create new custom area.
Randolfy Lv2Posted 16 Oct 2022 13:34
  
1. Goto Object > Network Object interface adds IP Address
2. Go to Policies > Access Control> GeoLocation Blocking
3. Verifythe validity of the policy.
Newbie308427 Posted 14 Oct 2022 22:10
  
Go to Policies > Access Control > GeoLocation Blocking > + Add
Jigen87 Lv3Posted 13 Oct 2022 22:01
  
Thanks for the questions and answers
Fuji12 Lv3Posted 13 Oct 2022 21:51
  
Helo,
NGAF GeoLocation Blocking:
Go to Policies > Access Control > GeoLocation Blocking > + Add
damulagski Lv3Posted 13 Oct 2022 21:48
  

Follow this steps:

1. Goto Object > Network Object interface adds IP Address
2. Go to Policies > Access Control> GeoLocation Blocking
3. Verifythe validity of the policy.
soneosansan Lv3Posted 13 Oct 2022 21:32
  

Go to Policies > Access Control > GeoLocation Blocking then add the desired IP

I Can Help:

Change

Moderator on This Board

1
131
3

Started Topics

Followers

Follow

18
8
0

Started Topics

Followers

Follow

Board Leaders