DHCP Mac Address Filtering

ITD_Mitch Lv3Posted 22 May 2018 10:51

I want to setup Mac Address Filtering in NGAF, i already bind all Mac Address of all workstation. Is there any features in NGAF DHCP to just give an IP address to workstation with Mac Address in the list or binded and drop all invalid mac address?

CTI LS has solved this question and earned 20 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

Hi Mitch,

Yes, there is no MAC Address Filtering function.
But there is an alternative solution,
1. Create all User MAC address into Local User
2. Create a new Authentication policy
3. Select "No Authentication for new user"

Please refer to below screen shot,
1.jpg
Is this answer helpful?
CTI LS Lv3Posted 22 May 2018 11:03
  
Hi Mitch,

You can configure to reserve all IP you want in the DHCP settings based on the MAC Address.
Then, configure the IP Pool with the exact amount of User to prevent unauthorized User get the IP from DHCP.
ITD_Mitch Lv3Posted 22 May 2018 11:07
  
So there is no features like "Enable Mac Address Filtering" like standard routers?
CTI LS Lv3Posted 22 May 2018 11:37
  
Hi Mitch,

Yes, there is no MAC Address Filtering function.
But there is an alternative solution,
1. Create all User MAC address into Local User
2. Create a new Authentication policy
3. Select "No Authentication for new user"

Please refer to below screen shot,
1.jpg
ITD_Mitch Lv3Posted 22 May 2018 11:57
  
I see.. thanks for the info LS.

I Can Help:

Change

Moderator on This Board

1
21
3

Started Topics

Followers

Follow

Board Leaders