IAM Multiple Bridge Unable To Set Same IP Network Segment

|
  • 198
  • 8

Issue Description

The customer was unable to set the same network segment IP address for multiple bridges.

Error/Warning Information

Handling Process

1. Must tick the enable bridge state propagation.



2. One bridge can be left empty.




3. Access bridge 2 using virtual IP.
In order to access WebUI for bridge2, you can access https://1.1.1.3 .

Root Cause

IAM multiple bridges do not support to set the same IP network segment.
  • Version before 11.x, one of the bridge can be set to any IP.
  • Version after 11.x (include 11.x), one of the bridge IP address can be left empty.

Solution

Set one bridge with IP address, another bridge IP left empty.

Suggestions

Multiple bridge is unable to set the same IP network segment
Sangfor_Brando Lv5Posted 09 Mar 2020 09:05
  
Thanks for sharing.
Faisal Posted 11 Aug 2020 13:28
  
Thank you very much for the information ...
Faisal Posted 02 Nov 2020 06:53
  
Nice article ...
Faisal Posted 06 Dec 2020 08:33
  
Great Info
Faisal Posted 07 Mar 2021 08:50
  
Very informative …
Faisal Posted 25 May 2021 14:51
  
Nice guidance ...
Raza Islam Lv3Posted 09 Sep 2022 17:43
  
Thank you very much for the information.
Raza Islam Lv3Posted 13 Sep 2022 20:34
  
Thank you very much.

I want to write a case
Doc ID: 2683
Author: Siva
Updated: 2019-12-24 15:06
Version: