Unable To Access Web Console: Did Not Enable MAC Track And Static Route Is Not Configured

|
  • 158
  • 7

Issue Description

The WANO is deployed in Bridge-mode. PC is in the direction of LAN interface through a router (the network segment is not on the same network segment as the Sangfor WANO). IP address of the bridge port of the WANO device is not Ping-able as well as the Web Console is unable to access from the PC.

Handling Process

1. Check “Track MAC address” to ensure that the internal network routing is reachable.

Path: System > System > Advanced

2. Static routes can also be configured to ensure that internal routes are reachable if do not want to enable “Track MAC address”.
  • IP address: Local Subnet
  • Gateway:IP address of the device interface connected to the internal network port of the WANO



3.After that the Web console can access normally.

Root Cause

The LAN segment pass through layer-3 device and the route is unreachable. As a result, the ping fails and the console cannot be accessed due to WANO does not have route which route to the internal network segment.

The WAN port can be accessed because of the default route will route to WAN direction..

Solution

Manually create a route policy to internal network segment in WANO.
Faisal Posted 15 Aug 2020 07:05
  
Thank you very much for the information ...
Muhammad Bilal Lv4Posted 11 Sep 2020 02:24
  
Thank you for sharing the information
Faisal Posted 28 Oct 2020 09:03
  
Nice article ...
Faisal Posted 11 Dec 2020 09:41
  
Great info ...
Ellechar Lv4Posted 03 Feb 2021 09:28
  
Very nice infooooooooooooooooooooooooooooo
Faisal Posted 14 Mar 2021 07:32
  
Very informative …
Faisal Posted 30 May 2021 10:35
  
Nice guidance ...

I want to write a case
Doc ID: 2425
Author: Sangfor_Yong
Updated: 2019-12-23 16:26
Version: