Sangfor Community»Categories Product Network Secure with next version(NGAF) Issue on Sangfor NGAF M5300-F-I Firmware AF 8.0.7R2

Issue on Sangfor NGAF M5300-F-I Firmware AF 8.0.7R2

views: 5219 | comments: 7 | added to Favorites 0
Lights on | 提示:支持键盘翻页<-左 右->
    组图打开中,请稍候......
Created: 15 Aug 2019 15:01

Summary:

Last edited by Sangfor Elsa 26 Aug 2019 16:06. Dear all experts here. I just want to share my experience about the NGAF configuration that I have done.  2 weeks ago we have some task fo ...

Reply

addimasqi Posted 27 Aug 2019 12:06
backup is M5400, and production is M5300.  The different is on the interface allocation port.  Example in the backup unit :
eth1 is for LAN, eth2 is for WAN1, eth3 is for WAN2, eth4 is for PTP-DMZ and eth5 is for DMZ switch.

And the production because of production unit has 4 ports ethernet and 2 ports SFP :
eth0 is for LAN, eth1 is for WAN1, eth2 is for WAN2, eth3 is for PTP-DMZ and eth4 is for DMZ switch.  (eth0 default is for management interface NGAF, I use too for zona LAN)

and I have confirmed that the configuration is correct for the interface.
Muhammad Talha Posted 27 Aug 2019 02:13
Hi dear,

NGAF backup model and NGAF production model, was it same ? I meant the configurations was it on same eth ports ?

addimasqi Posted 26 Aug 2019 13:02
come on....
addimasqi Posted 23 Aug 2019 16:53
I need a more concrete solution.  Why the configuration that I have configured on the backup unit is not running well on the production unit.  I have to do something strange and weird first so that the configuration goes well.  Why this forum with more than 100 members (i think like that), no one can give me the answer to discuss together.
sOOOn777 Posted 23 Aug 2019 16:33
maybe the method of delivery is less sophisticated
addimasqi Posted 19 Aug 2019 17:45
so quiet.  Or maybe just me that have an experience like this.