Bandwidth Management

sokhay Lv1Posted 21 May 2019 12:15

I not sure on bandwidth managent in Sangfor. I have 2 link for wan, one 10mb and another 30mb. In load balancing I use round robin. than in BM I create line one 10mb and line two 30mb, for BM policy 1 I use guaranteed 100%, 3mb per/use Line 1.
for BM policy 2 guaranteed 100%, 3mb per/user Line 2.
I see in BM status for sum 2 link it run only 10mb or 15mb.Online user around 20 to 30!! All line should be available 20mb more
WHY I test download or upload per user it process only 0.200 or 0.300kmb!!! it spare for other user or I'm wrong any configure?!?

Muhammad Talha has solved this question and earned 10 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

Hi Dear,

Kindly refer to the following document to check your configurations. Please note both NGAF and IAM have same configurations so follow this guide for your IAM:

http://community.sangfor.com/plu ... atabase&tid=290

If you see your configuration is fine then refer to the following document for troubleshooting

http://community.sangfor.com/plu ... tabase&tid=1152

Thanks.
Is this answer helpful?
Muhammad Talha Posted 24 May 2019 14:27
  
Hi Dear,

Kindly refer to the following document to check your configurations. Please note both NGAF and IAM have same configurations so follow this guide for your IAM:

http://community.sangfor.com/plu ... atabase&tid=290

If you see your configuration is fine then refer to the following document for troubleshooting

http://community.sangfor.com/plu ... tabase&tid=1152

Thanks.
Newbie579749 Lv4Posted 11 Jun 2019 09:22
  
Thanks for the answer.

I Can Help:

Change

Moderator on This Board

1
25
3

Started Topics

Followers

Follow

Board Leaders