Hello, can I use one DHCP server (relay) for multiple interfaces in Sangfor? I tried doing it but it seems that it only works on the same subnet of the dhcp server.

ArsalanAli has solved this question and earned 20 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

Yes you can use DHCP relay on multiple interfaces
In DHCP Option, Select relay , Name it what you want , select the interface/ subinterface / Vlan Interface on which you want user will get the IP address (interface Must be same as user gateway)
In IPv4 Server select the relay IP

same steps for other interfaces , but the relay IP will remain same
Is this answer helpful?
ArsalanAli Lv3Posted May-27-2025 17:26
  
Yes you can use DHCP relay on multiple interfaces
In DHCP Option, Select relay , Name it what you want , select the interface/ subinterface / Vlan Interface on which you want user will get the IP address (interface Must be same as user gateway)
In IPv4 Server select the relay IP

same steps for other interfaces , but the relay IP will remain same
Sheikh_Shani Lv2Posted May-29-2025 17:10
  
It is possible to use DHCP relay on more than one interface.
Choose the relay under the DHCP option, give it a name of your choosing, and then choose the interface, subinterface, or Vlan interface that the user should receive their IP address on (the interface must match the user gateway).
Choose the IPv4 server's relay IP.

The relay IP will stay the same, but the other interfaces will follow the same procedures.
Doll Lv1Posted May-30-2025 19:39
  
The DHCP relay can be used on multiple interfaces.  Select the interface, subinterface, or Vlan interface on which the user should obtain their IP address (the interface must match the user gateway) after selecting the relay under the DHCP option and giving it a name of your choosing.  Select the relay IP for the IPv4 server.  The other interfaces will adhere to the same protocols, but the relay IP will remain unchanged.

I Can Help:

Change

Trending Topics

Board Leaders