[Ended] Round 19 | Technical Document Scavenger Hunt
  

Sangfor Jojo Lv5Posted 2025-Jan-13 10:43

文档寻宝.jpg

Dear members,
We are excited to announce the launch of our Technical Document Scavenger Hunt! This activity encourages all users to dive deeper into our newly published technical document in the Knowledge Base, enhancing your understanding and engagement with the material.

By participating, you'll sharpen your skills and have the chance to collaborate and share insights with fellow users. Happy hunting, and may the best reader win!


1. Activity Rules                                                                                                         

1)  From now on, this activity will be published every Monday, just like “Question of the Week”.
All community users are invited to participate in the scavenger hunt.
2)  There will be at least 6 questions related to the provided documents.
3)  Participants must submit their answers under this post by Jan. 19th.
4)  Winners will be announced next Monday on the community platform.


2. Activity Duration                                                                                                   

Jan. 13 - Jan. 19

3. How to Participate                                                                                                                                                                                                  
1) Browse the Questions:
We have provided a list of questions based on the document's content. Your goal is to find the
answers within the documents.

2) Read the Documents:
Start by simply reading the catalog. Taking your second reading thoroughly with the given questions
which will make you read more efficiently.

3) Use the Search Function:
Most documents have a search feature. Use keywords from the questions to locate them quickly in relevant sections.


4.  Rewards                                                                                                                  

1) Correct Answers: 100 coins for each correct answer.
2) All Correct: An additional 100 coins for those who answer all questions correctly.
3) Users participating in this event for four consecutive weeks will receive an extra 400 coins. (NEW)
4) The top 3 users who answered the questions at least once in a month with the highest accuracy rate will get an additional 400 coins. (NEW)
In short, you can get 400 to 1500 coins if you participate in the event every week.

5. Scavenger Hunt Questions                                                                                       


Read these documents on the left side and answer the questions below.

Q1: How many times can be used for the same USB key in different clusters?
Q2: Starting from which version, the virtual key can be supported for licensing?
Q3: Is it required to add the node into cluster first before licensing for new deployment of HCI6.8.0 cluster?
Q4: Starting from which version, the licensing structure for virtual key has been changed?
Q5: What is the number of Running VM for the enterprise license edition​?
Q6:How to set up the VLAN for link aggregate interface?



6. How to Reply This Post                                                                                             

Try to make it simple! Do not repeat the questions when typing your answers.
reply sample.png

---------------------------------------------------------------------------------------------------------------------------


Recommended Reading                                                                                                
Sangfor Jojo Lv5Posted 2025-Jan-13 10:49
  
Here are the right answers for the above 6 questions:
8659867a42571c559f.png

礼物.gif 礼物.gif

Congratulations to the following participants on getting the coins.
9805767a425b744978.png
Newbie517762 Lv5Posted 2025-Jan-13 11:14
  
Q1: Three times.

Q2: Starting from HCI6.1.0.

Q3: Yes.

Q4: Starting from HCI6.8.0

Q5: No Limit

Q6:
1. Go to “Nodes > Physical Interfaces > Add Multiple Aggregate Interfaces”
2. Select the physical interface and input the VLAN ID
3. IP address/netmask/gateway of VLAN interface are optional Sangfor
ilham Lv2Posted 2025-Jan-13 12:08
  
Q1: three times
Q2: HCI6.1.0
Q3: Yes, it is required
Q4: HCI6.8.0
Q5: no limit
Q6: Go to “Nodes > Physical Interfaces > Add Multiple VLAN Subinterfaces”
Select the physical interface and input the VLAN ID
Noviyanto Lv3Posted 2025-Jan-13 12:44
  
Q1 : The same USB KEY can only be used three times in different clusters
Q2 : Starting from HCI6.1.0, virtual key is supported for licensing
Q3 : Yes it is. It is required to add the node into cluster first before licensing for new deployment of HCI6.8.0 cluster
Q4 : Starting from HCI6.8.0, the licensing structure for virtual key has been changed
Q5 : No limit
Q6 : - Start from version 6.0.0, it support VLAN tagging for the link aggregate interface
       - Go to “Nodes > Physical Interfaces > Add Multiple VLAN Subinterfaces”
       - Select the physical interface and input the VLAN ID
       - IP address/netmask/gateway of VLAN interface are optional
Clarence Roque Lv2Posted 2025-Jan-13 13:24
  
Last edited by Clarence Roque 2025-Jan-13 13:31.

Q1: 3 times
Q2: Starting from HCI6.1.0
Q3: Yes, It is required to add the node into cluster first.
Q4: Starting from HCI6.8.0
Q5: No limit
Q6: 1. Start from version 6.0.0, it support VLAN tagging for the link aggregate interface
2. Go to“Nodes > Physical Interfaces > Add Multiple VLAN Subinterfaces”
3. Select the physical interface and input the VLAN ID
4. IP address/netmask/gateway of VLAN interface are optional
Humayun Ahmed Lv3Posted 2025-Jan-13 13:26
  
Q1: Three times.
Q2: HCI version 6.1.0.
Q3: Yes.
Q4: HCI version 6.8.0.
Q5: there is no limit on the number of running VMs.
Q6: To set up the VLAN for a link aggregate interface, follow these steps:
Go to “Nodes > Physical Interfaces.”
Select “Add Multiple VLAN Subinterfaces.”
Choose the physical interface.
Input the VLAN ID.
Newbie362074 Lv3Posted 2025-Jan-13 14:05
  
Q1: 3 times
Q2: HCI6.1.0
Q3: Yes
Q4: HCI6.8.0
Q5: No limit
Q6: Go to “Nodes > Physical Interfaces > Add Multiple VLAN Subinterfaces”
Select the physical interface and input the VLAN ID

Ming_Hang Lv1Posted 2025-Jan-13 14:42
  
Q1: up to 3 times
Q2: HCI 6.8.0
Q3: yes
Q4: HCI 6.8.0
Q5: 65535 VMs
Q6: in Port Group
Dwi Nur Lv2Posted 2025-Jan-13 14:54
  
Q1: three times in different clusters
Q2: Starting from HCI6.1.0
Q3: Yes
Q4: Starting from HCI6.8.0
Q5: No Limit
Q6:
1. Start from version 6.0.0, it support VLAN tagging for the link aggregate interface
2. Go to “Nodes > Physical Interfaces > Add Multiple VLAN Subinterfaces”
3. Select the physical interface and input the VLAN ID
4. IP address/netmask/gateway of VLAN interface are optional