High Availability Hello Packet Interval and Threshold

firdaus9090 Lv1Posted 24 Oct 2024 12:21

hi Community,

We are doing high availability configuration for the Network Secure Firewall (NSF).
Please help me on this info. What is the recommended Hello packet interval and threshold and what to be based on ?


thanks

224636719ca85dbe68.png (86.58 KB, Downloads: 30)

224636719ca85dbe68.png

Newbie517762 has solved this question and earned 10 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

HiHi,

The “Hello packet” refers to the frequency at which messages are sent between the primary and secondary firewalls to check the status and ensure synchronization. This interval helps in maintaining the HA state by regularly verifying that both firewalls are operational and in sync.

Please refer to the picture below for the description:


Also, please find the attached file for detailed information on NSF HA.
SANGFOR_NSF_V8.0.85_Professional_2024_01_High_Availability.pdf (1.24 MB, Downloads: 36)
Is this answer helpful?
Newbie517762 Lv5Posted 24 Oct 2024 12:47
  
HiHi,

The “Hello packet” refers to the frequency at which messages are sent between the primary and secondary firewalls to check the status and ensure synchronization. This interval helps in maintaining the HA state by regularly verifying that both firewalls are operational and in sync.

Please refer to the picture below for the description:


Also, please find the attached file for detailed information on NSF HA.
SANGFOR_NSF_V8.0.85_Professional_2024_01_High_Availability.pdf (1.24 MB, Downloads: 36)
Farina Ahmed Lv5Posted 24 Oct 2024 13:50
  
Hello packet interval is just like a keep alive msg timer, if another NSF not respond within that time then it will be consider down (failure), and Hello Packet Threshold is for the number of packet that should be sent during one time interval within this 1000ms. maximum only three packets should be send not more than that, otherwise it will create blockage in the link between two NSF.
firdaus9090 Lv1Posted 25 Oct 2024 15:27
  
hi Community,

I know that the default configuration interval is 1000ms and threshold is 3, is that also the recommended configuration ?

thanks
Faisal P Posted 28 Oct 2024 11:26
  
The configuration
Hello Packet Interval: 1 second
Threshold: 3 missed packets

I Can Help:

Change

Moderator on This Board

11
7
5

Started Topics

Followers

Follow

1
3
5

Started Topics

Followers

Follow

0
4
5

Started Topics

Followers

Follow

67
20
3

Started Topics

Followers

Follow

3
14
3

Started Topics

Followers

Follow

1
137
3

Started Topics

Followers

Follow

Board Leaders