can pbr (Policy-Based Routes) be used on gre tunnels 5

masih_pemula Lv1Posted 01 Oct 2024 21:04

can pbr (Policy-Based Routes) be used on gre tunnels

Thank you in advance

Enrico Vanzetto has solved this question and earned 10 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins, 5 coins of bounty and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

Hi, Sangfor NGAF supports Policy-Based Routing (PBR) on GRE tunnels, allowing you to define routing policies based on criteria like IP addresses, ports, and protocols. To configure PBR on GRE tunnels:

Log in to the Sangfor NGAF web interface.

Create a GRE Tunnel: Navigate to Network > GRE Tunnel, click Add, and fill in the details.

Define PBR Rules: Go to Network > Routing > Policy-Based Routing, click Add, specify the criteria, and select the GRE tunnel as the next hop.

Apply and Verify: Enable the PBR rule, adjust its priority, and use diagnostic tools to ensure proper routing.
Is this answer helpful?
Enrico Vanzetto Lv4Posted 02 Oct 2024 00:03
  
Hi, Sangfor NGAF supports Policy-Based Routing (PBR) on GRE tunnels, allowing you to define routing policies based on criteria like IP addresses, ports, and protocols. To configure PBR on GRE tunnels:

Log in to the Sangfor NGAF web interface.

Create a GRE Tunnel: Navigate to Network > GRE Tunnel, click Add, and fill in the details.

Define PBR Rules: Go to Network > Routing > Policy-Based Routing, click Add, specify the criteria, and select the GRE tunnel as the next hop.

Apply and Verify: Enable the PBR rule, adjust its priority, and use diagnostic tools to ensure proper routing.
Newbie517762 Lv5Posted 02 Oct 2024 09:13
  
HiHi,

Please find the link below for your reference:
Network Secure_8.0.85_Best Practice_BGP over GRE over IPsec.

h__ttps://knowledgebase.sangfor.com/detailPage?articleData=%7B%22articleType%22%3A1,%22articleId%22%3A%22c8a29df5a9774c0fb760b1b5781a0e92%22,%22keyword%22%3A%22%22%7D
Farina Ahmed Lv5Posted 02 Oct 2024 12:43
  
Yes, PBR can be used on GRE tunnels to direct traffic based on policies like source IP or protocols. This allows selective traffic routing over the tunnel instead of relying solely on the routing table. Proper configuration is necessary depending on the platform used.
ArsalanAli Lv3Posted 02 Oct 2024 12:57
  
Yes you can use GRE Tunnels in PBR

1st you have to assign a zone for GRE Tunnels
then
Go to the PBR and Create the policy , and call the zone and address in Source or in destination (as you want)

I Can Help:

Change

Moderator on This Board

11
4
4

Started Topics

Followers

Follow

1
1
5

Started Topics

Followers

Follow

0
2
4

Started Topics

Followers

Follow

67
18
3

Started Topics

Followers

Follow

3
9
3

Started Topics

Followers

Follow

1
136
3

Started Topics

Followers

Follow

Board Leaders