old firmware 11.6

Newbie754636 Posted 04 Sep 2024 23:48

anyone can help me with old firmware? i need to factory reset my old sangfor m5100 AC-I-S with firmware updater app. trying with cross cable not luck

Enrico Vanzetto has solved this question and earned 10 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

Hi, i think you are talking about Sangfor NGAF m5100. Try following these steps:

Restore password with USB Drive:
1. Create an empty txt file named reset-password.txt or Copy the reset-password.txt file to the root directory of U Disk;
2. Insert the U disk, restart the device;
3. When the device can normally log on to the WebUI, pull out the U disk;
4. See the results of the U disk file reset-password.log,If the recovery is successful, record the restored console password in this file, otherwise the log is recorded the recovery failure information.

Notes:
1. This TXT file can be directly on the Windows system to establish an empty TXT file, the file name to reset-password.txt;
2. The txt file must be in the root directory of the U disk;
3. U disk can be single or multiple partitions. A single partition of the U disk format must be FAT32; a multi-partition U disk must put the txt file in the first partition, and the first partition format must be FAT32.
Is this answer helpful?
Enrico Vanzetto Lv4Posted 05 Sep 2024 00:17
  
Hi, i think you are talking about Sangfor NGAF m5100. Try following these steps:

Restore password with USB Drive:
1. Create an empty txt file named reset-password.txt or Copy the reset-password.txt file to the root directory of U Disk;
2. Insert the U disk, restart the device;
3. When the device can normally log on to the WebUI, pull out the U disk;
4. See the results of the U disk file reset-password.log,If the recovery is successful, record the restored console password in this file, otherwise the log is recorded the recovery failure information.

Notes:
1. This TXT file can be directly on the Windows system to establish an empty TXT file, the file name to reset-password.txt;
2. The txt file must be in the root directory of the U disk;
3. U disk can be single or multiple partitions. A single partition of the U disk format must be FAT32; a multi-partition U disk must put the txt file in the first partition, and the first partition format must be FAT32.
Zonger Lv5Posted 05 Sep 2024 00:25
  
The Sangfor M5100 AC-I-S is an older device, and the firmware update process might be more complex. Since you are having trouble using the firmware updater app with a cross cable, its recommend to try the following options:

1. Upgrade via serial port: You can try using a serial cable to connect to the M5100 and update the firmware manually. You'll need to use a serial terminal software like HyperTerminal or PuTTY to connect to the device's serial port. Refer to the M5100's user manual or online documentation for the correct serial port settings and commands.

2. Use a USB-to-RS232 adapter: If you don't have a serial cable, you can try using a USB-to-RS232 adapter to connect to the M5100's serial port. This might allow you to update the firmware using the serial port method.
Newbie517762 Lv5Posted 05 Sep 2024 08:57
  
HiHi,

As I remember, you have posted the same issue before.
I suggest contacting Sangfor Technical Support via email for assistance to save your time.
Tech.Support@sangfor.com

I Can Help:

Change

Moderator on This Board

11
7
5

Started Topics

Followers

Follow

1
3
5

Started Topics

Followers

Follow

0
4
5

Started Topics

Followers

Follow

67
20
3

Started Topics

Followers

Follow

3
14
3

Started Topics

Followers

Follow

1
137
3

Started Topics

Followers

Follow

Board Leaders