import vdc5.9 to hci 6.9.1 power on - error guest has not initialized the display (yet)

63865 Ben Lv1Posted 28 Aug 2024 10:17

Last edited by 63865 Ben 02 Sep 2024 14:23.


import vdc5.9 to hci 6.9.1 error guest has not initialized the display (yet)
how to fix it? thx

I was tested craeting new vm to power on. it is display error guest has not initialized the display (yet).
My hardware is Dell R6625

Zonger has solved this question and earned 10 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

The error "Guest has not initialized the display (yet)" when importing vdc 5.9 to HCI 6.9.1 is typically caused by compatibility issues between the two versions.
Is this answer helpful?
Enrico Vanzetto Lv4Posted 29 Aug 2024 14:08
  
Hi, could you please tell us more details about the issue you have?
Zonger Lv5Posted 29 Aug 2024 19:08
  
The error "Guest has not initialized the display (yet)" when importing vdc 5.9 to HCI 6.9.1 is typically caused by compatibility issues between the two versions.
Sheikh_Shani Lv2Posted 31 Aug 2024 13:15
  
Hello Dear

This error usually means that the virtual machine's display is not set up correctly. To fix it, try these steps:

1. Check Virtual Display Settings: Make sure the virtual machine's display settings are enabled and set to a proper display protocol (like VNC or Spice).

2. Reboot the Guest VM: Sometimes, simply restarting the virtual machine can resolve the issue.

3. Update Tools: Ensure that any necessary guest tools or drivers for the virtual machine are installed and up to date.

4. Check Logs: Look at the logs for any error messages that could provide more specific information about the problem.

5. Reconfigure Display Options: If you're using a specific display option, try changing it to see if that resolves the issue.

I Can Help:

Change

Board Leaders