Failed to import the VM .ova. file

gleon Posted 16 Aug 2024 03:02

Hellio I am trying to import an .ova file an I am gettint the following Issue
Failed to import the VM Kali.ova. Failed to obtain disk list, possibly because the disk is in use. Please select another disk

Aparently the .ova file has an error but I dont know wath type of
Could you help me ?

Thanks

Newbie650977 has solved this question and earned 10 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

Important Notices:

1. The import of OVA files exported from the VMware web console is not supported on the Hyper-Converged Infrastructure (HCI) platform.

2. All virtual machines exported from VMware must have VMware Tools uninstalled after being imported into the HCI platform.

3. The HCI platform exclusively supports the import of virtual machines in OVA, OVF, and VMA formats; other formats are not supported at this time.

4. Upon importing a Windows OVA into the HCI platform, the USB mouse driver will be updated, with an installation prompt appearing on the Windows interface.

5. After importing a Linux OVA into the HCI platform, manual configuration of the network card IP address is required.
Is this answer helpful?
sitobeli Lv2Posted 19 Aug 2024 17:12
  
Suspected your export file is corrupted.
fuadmahbubun Lv2Posted 19 Aug 2024 18:02
  
Hi, if possible, you may export again, and try re-import OVA file.
Enrico Vanzetto Lv4Posted 19 Aug 2024 19:48
  
Hi, where did you perform export of this virtual machine? As suggesded above, try to redo the export of this virtual machine and try firstly to reimport it on the source to verify that the ova file is ok.
Newbie650977 Lv1Posted 19 Aug 2024 20:30
  
Important Notices:

1. The import of OVA files exported from the VMware web console is not supported on the Hyper-Converged Infrastructure (HCI) platform.

2. All virtual machines exported from VMware must have VMware Tools uninstalled after being imported into the HCI platform.

3. The HCI platform exclusively supports the import of virtual machines in OVA, OVF, and VMA formats; other formats are not supported at this time.

4. Upon importing a Windows OVA into the HCI platform, the USB mouse driver will be updated, with an installation prompt appearing on the Windows interface.

5. After importing a Linux OVA into the HCI platform, manual configuration of the network card IP address is required.
Newbie650977 Lv1Posted 20 Aug 2024 09:27
  
Why convert vmdk files to ovf?

In a VM, you can directly export the virtual machine as an ovf format. You can give it a try; before exporting to ovf, you need to uninstall vmtools first.
Prosi Lv3Posted 20 Aug 2024 12:17
  
Hi,

Try copying the OVA file to the local hard disk, not in a root folder.

I Can Help:

Change

Moderator on This Board

2
1
0

Started Topics

Followers

Follow

11
7
5

Started Topics

Followers

Follow

3
14
3

Started Topics

Followers

Follow

2
2
0

Started Topics

Followers

Follow

Board Leaders