DSM Synology BACKUP POLICY NGAF

IT Infra Lv1Posted 18 Jun 2024 15:33

Hi, how can we make a policy for Backup & Synchron from Endpoint to DSM Synology, i have make policy allow the URL but everytime we test the connection, always failed, any ideas? Thanks guys

By solving this question, you may help 782 user(s).

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

CLELUQMAN Lv3Posted 18 Jun 2024 16:02
  
try to troubleshoot what is blocking.
Go to System>Troubleshooting>Precise traffic analysis

SrcIP: EndPoint IP
DscIP: Synology IP

Then Turn On
Prosi Lv3Posted 18 Jun 2024 21:13
  
hi,

Create backup rules based on your needs. Determine the backup frequency, retention periods, and VMs to include in backup tasks.
Use Sangfor aDR function for Disaster Recovery.
> Need to deploy Sangfor SCP with aDR license.
> Need to have second Sangfor HCI cluster as Disaster Recovery site.
> Add the storage with iSCSI/FC protocol to DR cluster.
> Configure the DR policy in Sangfor SCP with required RPO.
Enrico Vanzetto Lv4Posted 18 Jun 2024 21:20
  
Hi, which protocol are you allow in your rule? Check on the knowledge Synology portal the ports that Synology use for the backup solution you are using.
After that, create an application rule that allow this specific traffic and protocols for your nas and the clients involved
Newbie517762 Lv5Posted 19 Jun 2024 09:05
  
HiHi,

Different Synology backup applications require specific network ports. For detailed information, please consult the Synology Knowledge Center web page. Below, you will find some sample configurations for your reference.

Synology backup.jpg
Prosi Lv3Posted 19 Jun 2024 10:16
  
Hi,

You can utilize built-in services on your Synology NAS to make copies of your Active Backup for Business data in case of an IT disaster.
Enrico Vanzetto Lv4Posted 19 Jun 2024 15:25
  
Hi, please ensure that the software works as expected by testing on a client that is on the same network of your nas. Double check firewall on the client, like windows firewall. After this, try to perform traffic analysis as suggested before setting source ip (the clients) and destination ip (your nas) and perform a manual backup. Please post here the results
CLELUQMAN Lv3Posted 20 Jun 2024 09:48
  
bro, have u try the troubleshooting ?
Farina Ahmed Lv5Posted 20 Jun 2024 17:26
  
To create a successful policy for Backup & Synchronization from an Endpoint to a DSM Synology NAS, ensure that the necessary network ports are open and that there are no firewall rules blocking the connection. Verify that the URL and IP address of the DSM Synology NAS are correctly specified in the policy. Check for any logs on both the endpoint and the DSM Synology that might provide specific error messages. Also ensure that both the endpoint and the NAS have up-to-date firmware and software to avoid compatibility issues.
Tammee Ong Lv1Posted 05 Jul 2024 15:13
  
Dear IT Infra,

Can you clarify your inquiry in detail and provide a relevant screenshot for us to better assist for you? May we know what effect you want to achieve?

I Can Help:

Change

Moderator on This Board

11
4
4

Started Topics

Followers

Follow

1
1
5

Started Topics

Followers

Follow

0
2
4

Started Topics

Followers

Follow

67
18
3

Started Topics

Followers

Follow

3
8
3

Started Topics

Followers

Follow

1
136
3

Started Topics

Followers

Follow

Board Leaders