[Ended] #Weekly Event# Question 263 - One Question A Week
  

Sangfor Jojo Lv5Posted 2024-Dec-30 09:12


Dear members,
Let's move on to the new question and see if you can get the right answer again.

Welcome to this week's new question! We got more and more members joining us and some of you figured out the right answer with ease!

Event Duration:   Dec. 30, 2024 - Jan. 5, 2025

[How to Play]
Reply to the question by commenting on this thread.
Your answer is only visible to the author.


[Event Rewards]
Each reply will earn 100 coins, and the right answer will earn an extra 200 coins.

[Tips]
1. The rewards will be sent out next week.
2. The right answer will be updated in this thread next Monday.


[Question]

HCI (All versions) > IPMI Module
How to change aServer IPMI default IP address?

[Answer]
There are 2 methods:
1. Connect and access BMC with default IP 192.168.10.10. Change the IPMI IP via BMC setting.
2. Reboot and access BIOS setting to change IPMI default IP.
Note: Changing IPMI IP address via BMC only affect temporary (reset after power disconnection), while changing via BIOS will permanently affective.


<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

Related Events:
1. Technical Document Scavenger Hunt: Find answers in the provided document and earn 600 coins.

2. Provide Your Ratings for Our Docs: 500 coins for participation, and another 300 coins for specified suggestions.

3. Try Sangfor Checks and Share Opionions:1000 coins for downloading, 1300 coins for referral, and 2500 coins for sharing your opinions!



wow Lv1Posted 2024-Dec-30 09:32
  
Can change via web GUI IMPI.
Noviyanto Lv3Posted 2024-Dec-30 09:47
  
- Power on the server
- Enter the BIOS by pressing the Del key
- Select the IPMI tab
- Select BMC Network Configuration and press Enter
- Choose Yes and press Enter
- Select Configuration Address Source and press Enter
- Choose Static and press Enter
- Select Station IP address and enter a new IP address
- Select Subnet mask and enter a new subnet mask
- Select Gateway IP address and enter a new gateway IP address
- Press F4 to save and exit the Setup Utility
Newbie877525 Lv1Posted 2024-Dec-30 11:38
  
1.        Connect your PC to the IPMI port on the server. This port is typically labeled "MGMT" or marked with a tool icon.
2.        Configure your PC's network settings to be on the same subnet as the default IPMI IP address (192.168.10.10). For example, set your PC's IP to 192.168.10.x, with a subnet mask of 255.255.255.0.
3.        Open a web browser and navigate to https://192.168.10.10.
4.        Log in using the default credentials:
        Username: sangfor
        Password: S#AN$6fo81r
5.        After logging in, navigate to the network configuration settings within the IPMI interface.
6.        Locate the section for IP address configuration.
7.        Change the IP address, subnet mask, and gateway to the desired values that align with your network requirements.
8.        Save the changes and reboot.
Newbie517762 Lv5Posted 2024-Dec-30 12:13
  
IPMI Address Configuration:
Log in to the BIOS interface, select Server MGMT > BMC Network Configuration > BMC IPv4 network configuration / BMC IPv6 network configuration, and press enter to view/change the configuration of current BMC IPv4 and BMC IPv6 network parameters.
Muhammad Shiraz Lv2Posted 2024-Dec-30 12:14
  
To change the IPMI default IP address in HCI, log in to the IPMI web interface using the current or default IP address. Go to the network or LAN configuration settings, switch to static IP mode, and enter the desired IP address, subnet mask, and gateway. Save the changes and verify by pinging the new IP address. Alternatively, you can access the BIOS, navigate to IPMI settings, and configure the network settings there. Ensure the new IP does not conflict with other devices in the network.
Humayun Ahmed Lv3Posted 2024-Dec-30 12:26
  
Access the IPMI Web Interface then Log In and Navigate to Network Settings and enter the new IP address, subnet mask, and gateway then Save the changes.
Imran Tahir Lv4Posted 2024-Dec-30 12:31
  
through SSH we can chang eht IPMI default IP address
Moneeb Lv2Posted 2024-Dec-30 15:02
  
1. Login HCI, go to System > Port Management and press Enable at the bottom right.

2. Open aDeploy > Toolkit > IPMI Password Change and enter IP/Password Cluster HCI (Make sure SSH Port is open on Cluster)

3. A window will pop up asking you to click Change Password and enter a new password for the desired Node. There you can also find the option to change the IP address at the top.

ND Lv3Posted 2024-Dec-30 15:47
  
Click Nodes > Communication Interface in the HCI console. Click Management Interface, click Settings to enter the configuration page, and select the physical interface as the management interface, and fill out the interface IP ,netmask and gateway. Then click OK