How to add routing to cloud server

How to add routing to the cloud server? I have 4 cloud servers and the server already has public IP. How to connect the cloud server to Office with Sangfor?

To add routing to the cloud server and connect it to the office using Sangfor, follow these general steps:

• Log in to the Sangfor management console and navigate to the VPN configuration section.
• Create a site-to-site VPN between the office network and the cloud server network. This will allow the two networks to communicate securely with each other.
• Configure the routing on the cloud server to route traffic to the office network through the VPN. You can do this by adding a static route on the cloud server's operating system. For example, if the office network is on the 192.168.1.0/24 subnet, you would add a static route on the cloud server that routes traffic destined for that subnet to the IP address of the VPN gateway.
• Configure the routing on the office network to route traffic to the cloud server network through the VPN. This is typically done by adding a static route on the office network's router/firewall that routes traffic destined for the cloud server network to the IP address of the VPN gateway.
• Test the connection by pinging a device on the other network from each side.
• If necessary, configure any necessary firewall rules on the cloud server or office network to allow traffic through the VPN.
  
  

To connect your cloud servers to your office network using Sangfor, you would typically need to set up a virtual private network (VPN) between the cloud servers and your office network. Here are the general steps to add routing and establish the connection:

Configure VPN on Sangfor IAM: Access the Sangfor IAM device management interface and configure a VPN tunnel. This typically involves specifying the necessary VPN settings such as authentication methods, encryption protocols, and IP addressing.

Cloud Server Configuration: On each of your cloud servers, configure the VPN client settings to establish a connection to the Sangfor IAM device. This involves configuring the VPN client software or network settings with the appropriate connection details provided by the Sangfor IAM.

Establish VPN Connection: Start the VPN client on each cloud server and initiate the connection to the Sangfor IAM device. Verify that the VPN connections are successfully established. The VPN client software should indicate a successful connection status.

Routing Configuration: Once the VPN connections are established, you need to configure routing on your cloud servers and office network to allow traffic to flow between them. This typically involves adding specific routes on your cloud servers to direct traffic destined for the office network to the VPN tunnel and vice versa.

Test Connectivity: After configuring routing, test the connectivity between your cloud servers and the office network. You can try pinging devices on the office network from the cloud servers or accessing resources (such as file shares or applications) located in the office network from the cloud servers.

u can use vpn

Your kind of setup is called "Hybrid Cloud",
1. if you use Microsoft Azure, you can use the "Express Route" connection.
2. if you use AWS, you can use the embedded feature which is the "AWS Direct Connect"
3. if you use Google, use can use "Google Dedicated Interconnect".

Hi,
Sangfor Cloud Platform is built on the world's most advanced Business-Centric HCI platform for enterprise cloud computing and services.
Thanks

Configure the required network routing rules or policies within the cloud provider's networking settings to add routing to a cloud server. This will ensure that the server is properly connected to other network resources or services.

Hello there! to add routing to a cloud server, you need to configure the routing table to direct traffic between the server and other network devices or subnets. This can typically be done through the cloud provider's web console or API.

Log in to the Sangfor management console and navigate to the VPN configuration section.
Create a site-to-site VPN between the office network and the cloud server network. This will allow the two networks to communicate securely with each other.
Configure the routing on the cloud server to route traffic to the office network through the VPN. You can do this by adding a static route on the cloud server's operating system. For example, if the office network is on the 192.168.1.0/24 subnet, you would add a static route on the cloud server that routes traffic destined for that subnet to the IP address of the VPN gateway.
Configure the routing on the office network to route traffic to the cloud server network through the VPN. This is typically done by adding a static route on the office network's router/firewall that routes traffic destined for the cloud server network to the IP address of the VPN gateway.
Test the connection by pinging a device on the other network from each side.
If necessary, configure any necessary firewall rules on the cloud server or office network to allow traffic through the VPN.

Configure a VPN tunnel on Sangfor IAM: Navigate to the Sangfor IAM device management interface and create a VPN tunnel. Typically, this entails defining the required VPN settings such as login methods, encryption protocols, and IP addressing.