aTrust Integrated with VDI Configuration Guide
  

TommyWong2025 Lv1Posted 2026-Jun-29 13:46

Last edited by TommyWong2025 2026-Jun-29 17:23.

1. Generate the VDI connection key in the VDC
2. Copy the VDI connection key to the aTrust controller for integration
3. Create the VDI Resource in the aTrust (just for integrated with the VDC, which means that the remote app/vdi resource are created in the VDC rather aTrust)
4. Enable the SSO aTrust Authentication and copy the secure key and secret key to the VDI (SSO)
5. Optional, for download the vdc client and set up the client access landing page
6. Optional, secure policy setting for the aTrust to access VDI
        6.1 specific time to allow access
        6.2 end point must be installed some software and other scenarios

DNAT for the aTrust Controller and Proxy Gateway in the edge router. Take example as below.

For aTrust controller for authentication, go to aTrust Controller, System -> System Settings -> General -> Client Connection Settings

For integrating with aTrust Proxy into the Controller, go to System -> Proxy Gateway -> Gateways -> Add area -> Add proxy gateway


TCP/UDP Ports need to be release

aTrust and VDI linkage principle flowchart

https://knowledgebase.sangfor.com/detailPage?articleData=%7B%22articleType%22%3A1,%22articleId%22%3A%22aa5cc2101b2349caae04d0956415df7f%22,%22keyword%22%3A%22vdc%20and%20atrust%20integration%22%7D

Like this topic? Like it or reward the author.

Creating a topic earns you 5 coins. A featured or excellent topic earns you more coins. What is Coin?

Enter your mobile phone number and company name for better service. Go

Prosi Lv3Posted 2026-Jun-30 10:11
  
Thank you very much for this valuable information.