Sangfor NGAF reboot logs

Moneeb Lv2Posted 13 Nov 2023 19:49

Hi,

I have Sangfor NGAF 8.0.47. I want to check how many times it got rebooted in last 24 hours or within last week but i am unable to find the exact option for this. Kindly let me know if there is any option available.

mdamores has solved this question and earned 20 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

In cases like this, it would be best to consult or seek the assistance of Sangfor TAC team for immediate resolution or assistance on your concern.
Is this answer helpful?
soneosansan Lv3Posted 20 Nov 2023 14:56
  
If you are unable to find the information through the device's user interface or command-line interface, consider reaching out to Sangfor support. They can provide specific guidance on how to obtain information about reboots or may suggest alternative methods.
Rica Cortez Lv2Posted 20 Nov 2023 14:55
  
If SNMP (Simple Network Management Protocol) is enabled on your Sangfor NGAF device, you might use SNMP monitoring tools to query the device for information about reboots. SNMP can provide various system-related information.
damulagski Lv3Posted 20 Nov 2023 14:55
  
If Sangfor NGAF has a command-line interface (CLI), you might be able to use command-line tools to gather reboot information. Connect to the device using SSH or another supported method and explore available commands.
LucyHeart Lv3Posted 20 Nov 2023 14:54
  
The log may be seen using the following technique.
System -> Diagnostics -> Records
Additionally, the date may be changed in the upper right corner.
babeshuka Lv3Posted 20 Nov 2023 14:54
  
One. Use your login credentials to access the web interface of your Sangfor NGAF device. Once there, seek for a section labeled "System Logs," "Event logs," or a similar category. You can look for records pertaining to restarts or reboots, which could contain timestamps and the precise reason why the reboot occurred.
Two. Use a console connection or SSH to access the CLI. To view details about system events, use the commands "show system log" or "show system status". search for items pertaining to restarts or reboots.
Jigen87 Lv3Posted 20 Nov 2023 14:53
  
Reboot logs can be accessed using the following steps: navigate to the management interface of Sangfor NGAF (Next-Generation Application Firewall), find the logs or event viewer section under monitoring or system menus, and search for keywords like "reboot" or "restart." Reboot logs frequently allow users to filter events by date and time, enabling checks for reboots that have occurred within the last 24 hours or the last week. If these logs are not easily located, it may be helpful to contact Sangfor support for assistance or to refer to the user manual or technical documents relevant to the NGAF version, which can offer comprehensive instructions.
isabelita Lv3Posted 20 Nov 2023 14:52
  
Access the system logs on the Sangfor NGAF device. This can often be done through the device's web interface. Look for logs or events related to system restarts or reboots.
RegiBoy Lv5Posted 20 Nov 2023 14:51
  
Refer to the Sangfor NGAF 8.0.47 User Manual for detailed instructions on accessing system logs and viewing reboot history.
If you encounter difficulties or require specific commands for accessing the reboot history, it is advisable to reach out to Sangfor support for detailed guidance tailored to your NGAF device and firmware version.
For further assistance, you can also refer to the Sangfor community forum or documentation for insights from other users who may have encountered similar requirements.
Please note that the provided information is based on general practices, and the specific steps may vary based on the NGAF device's configuration and firmware version.
Racoon Lv2Posted 20 Nov 2023 14:50
  
Access the NGAF device's CLI using SSH or console access.
Enter the appropriate command to view the system logs or reboot history. The specific command may vary based on the NGAF firmware version.
RobertonY Lv2Posted 20 Nov 2023 14:50
  
Log in to the NGAF device's web-based management interface.
Navigate to the system logs section to view the historical logs, including reboot events.

I Can Help:

Change

Moderator on This Board

11
7
5

Started Topics

Followers

Follow

1
3
5

Started Topics

Followers

Follow

0
4
5

Started Topics

Followers

Follow

67
20
3

Started Topics

Followers

Follow

3
14
3

Started Topics

Followers

Follow

1
137
3

Started Topics

Followers

Follow

Board Leaders