The Disk is self-checking

aaditiya Lv1Posted 10 Oct 2023 15:26

Dear Support,

Need your kind of help because my Sangfor WANO experiencing problem like on attached file.
Can anyone suggest the short and simple solution to work around this problem?
Thanks.

sangfor disk self-checking.jpg (114.72 KB, Downloads: 907)

sangfor disk self-checking.jpg

By solving this question, you may help 203 user(s).

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

aaditiya Lv1Posted 01 Nov 2023 10:56
  
Thanks everyone for all your answer. Some of you replies here and suggest to replace the HD to SSD. My question is, can I just replace the HD with SSD without need to do some configuration on Sangfor? If yes, maybe I'll consider it.
Thanks
soneosansan Lv3Posted 18 Oct 2023 11:34
  
Sangfor WANO's integrated disk inspection feature may be programmed to run consistently. Before they cause service outages, potential disk problems may be found and fixed with this tool.
RegiBoy Lv5Posted 18 Oct 2023 11:32
  
There is big chance that your HDD Hardaware has occured some issues of it is already defective that is why WANO is always checking. You may contact Sangfor Support Team for faster escalation of issues.
Happpy Lv3Posted 18 Oct 2023 11:31
  
I believe there is a bug in the current firmware, you can try upgrading to the most recent version. You could try contacting TAC support and submitting a case if upgrading didn't resolve the issue.
damulagski Lv3Posted 18 Oct 2023 11:30
  
Sangfor WANO will automatically start a disk check on all drives when the system is turned back on if there is a power loss. This is done to make sure that the power loss did not corrupt the disks.
LucyHeart Lv3Posted 18 Oct 2023 11:29
  
When Sangfor WANO notices a disk problem, it will immediately start a disk check to try to fix the issue.
babeshuka Lv3Posted 18 Oct 2023 11:28
  
A built-in disk inspection capability of Sangfor WANO may be set to operate on a regular basis. This function may be used to identify and fix possible disk issues before they result in service interruptions.
JoanaPatricia Lv2Posted 18 Oct 2023 11:28
  
You should file a warranty claim if your hardware (the disk) has a problem. or switch from HD to SSD
Rica Cortez Lv2Posted 18 Oct 2023 11:27
  
You can try updating your firmware to the most recent version if you think the current firmware has a flaw. If upgrading didn't fix the problem, you might try contacting TAC support and opening a case.
Fuji12 Lv3Posted 18 Oct 2023 11:25
  
Update your sangfor program if it contains bugs, or file a TAC case.

I Can Help:

Change

Board Leaders