IGMP Multicast

Ginalyn Lv2Posted 08 Mar 2023 23:11

We need to have a router capable of IGMP (Multicast) that can route IP Radio Communication. How to configure IAG to enable IGMP.

CTI_JianJie has solved this question and earned 10 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

Yes, Sangfor IAG supports IGMP multicast transparency in the network; the packets will passthrough the IAG bridge interface.
Is this answer helpful?
Abdul Sami Lv2Posted 14 Mar 2023 15:01
  
The IGMP configuration an be done on the router or switch .
CLELUQMAN Lv4Posted 14 Mar 2023 13:44
  
no need to configure it in IAG.
Farina Ahmed Lv5Posted 13 Mar 2023 18:38
  
Yes you can use Huawei series or Cisco series router but check their model which support IGMP (multicast) in their specification sheet.
RegiBoy Lv5Posted 13 Mar 2023 16:55
  
IGMP is supported by IAG and you don't have to configure any to enable this. The configuration lies on the router or switch that will manage the IGMP.
April Men Lv1Posted 13 Mar 2023 16:16
  
The configuration is depends on the brand of router or switch
FoxR Lv2Posted 13 Mar 2023 13:15
  
Set it to the managed switch that you are using instead on the Sangfor
SheT Lv2Posted 13 Mar 2023 13:12
  
You can set it manual on the router or switch that you use
Imran Tahir Lv4Posted 13 Mar 2023 12:26
  
We can set the IGMP to the managed switch you are using.
SherylCor Lv2Posted 13 Mar 2023 11:35
  
Last edited by SherylCor 15 Mar 2023 08:58.

Below is the configuration steps by steps:
Please follow the video instruction only not the language:

I Can Help:

Change

Moderator on This Board

1
3
5

Started Topics

Followers

Follow

Board Leaders