Sangfor IAG - AD Users are not sync in IAG user's list

arjay Lv3Posted 2022-Oct-27 09:50

There are some AD users that were not recorded/sync in IAG user list

May I know what might be the cause?

Thank You!

CTI_JianJie has solved this question and earned 10 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

Last edited by CTI_JianJie 07 Nov 2022 16:19.

There is 3 common root cause causing certain AD users to be unable to synchronize with Sangfor IAG online user:
1. Check if there are any local users available, if yes, it will not sync again as the AD users
2. Check the authentication policy if the target object is the user.
3. Check on the AD user group, Sangfor IAG got limited on the maximum nested AD user group that can synchronize.
If you need further assistance, please do not hesitate to contact sangfor support team via email tech.support@sangfor.com
Is this answer helpful?
Brooker Posted 2022-Nov-07 08:38
  
The firmware needs to be updated
kmrnliaqat Lv3Posted 2022-Nov-05 17:11
  
Version need to update
Deorwine Lv2Posted 2022-Nov-03 11:04
  
Try to firmware upgrade
Luih Miranda Lv3Posted 2022-Nov-02 08:25
  
Please make a firmware upgrade.
Faisal P Posted 2022-Nov-01 12:30
  
Users synchronized to the IAM by using the automatic synchronization function on the user management page.
Brooker Posted 2022-Nov-01 10:43
  
Check carefully if the system time is sync and the integration with the AD is successful
jetjetd Lv5Posted 2022-Nov-01 01:32
  
Update the firmware of the appliance and double check the system time of your appliance.
Imran Tahir Lv4Posted 2022-Nov-01 01:21
  
Check the user OS
nobitachou Lv2Posted 2022-Oct-31 20:18
  
I'm sure it takes time especially on a large numbers of users.

I Can Help:

Change

Moderator on This Board

1012
210
99

Started Topics

Followers

Follow

Board Leaders