#Installation Guide# Sangfor aCloud Installation Guidelines
  

jetjetd Lv5Posted 30 Jun 2022 14:10

Last edited by jetjetd 30 Jun 2022 15:38.

Sangfor aCloud Installation Guidelines



Product: aCloud

Requirements——
          1. Sangfor aCloud (HCI) latest firmwareinstallation image (.ISO) (can be downloaded at Sangfor Community)
          2. USB drive (capacity more than 4GB)
          3. UltraISO image utility tools

Configuration Steps——

Step 1.  Download and installdisk imaging tools. We will be using UltraISO to write aCloud firmware into  USBdrive. Follow the screenshot steps below to write the aCloud firmware into USBdrive.




Step 2.  Once aCloud firmware has been written in the USB, the below screen will be seen, and you can now click “Close” the window screen.

Step 3.  Plug in the USB drive and power on theserver. Press DELETE (DEL) to enter BIOS Setup

Step 4.  Select Boot option and change the 1st Boot Device to USB drive.

Step 5.  Save the configuration and exit.

Step 6.  Let the server boot in the USB drive and selectthe topmost option “Install Sangfor aCloud on thismachine” and in the next window select the “Sangfor aCloud Installer”option.


Step 7.  Press “I agree” to agree terms and conditions.

Step 8.  When you see this, Sangfor aCloud has alreadybeen installed. Click Yes to confirm format the existing drive.

Step 9.  Ensure select the correct system disk for installation.

Step 10.  When the below screen prompts, select “No” to skip benchmarking.

Step 11.  In the next screen, edit the networkconfiguration of the eth0.

Step 12.  Change the IP address, netmask and gateway for eth0.

Step 13.  Select “No” if you will not configure VLAN.

Step 14.  Installation completed. Click “OK” to restart the server.

Step 15.  Once reboot, you must enter the BIOS setup and change the 1st boot device to system disk.

Step 16.  Select Save configuration and reset option and click “Yes”.

Step 17.  Once the server boots in the system. The screenappears and now you can connect eth0 to access web console with the configured IP address.

Step 18.  You can now access the aCloud server usingyour browser. We will be using the default username and password which is admin.

Step 19.  After logging in you will see the below window screen.
-END-

355862bd3b3e39817.png (164.87 KB, Downloads: 933)

355862bd3b3e39817.png

Like this topic? Like it or reward the author.

Creating a topic earns you 5 coins. A featured or excellent topic earns you more coins. What is Coin?

Enter your mobile phone number and company name for better service. Go

Laing Posted 23 Jun 2023 23:46
  
The usefulness of Sangfor's troubleshooting steps lies in their step-by-step guidance.
Tree Bee Lv1Posted 23 Jun 2023 23:43
  
Sangfor's troubleshooting steps provide a systematic approach to problem-solving.
Vivo Oppo Posted 23 Jun 2023 23:39
  
Sangfor's troubleshooting steps are a lifesaver in VDI environments.
Kada Sikada Posted 23 Jun 2023 23:38
  
The practicality and usefulness of Sangfor make it an essential tool.
Paquito Yasay Lv1Posted 23 Jun 2023 23:35
  
The usefulness of Sangfor lies in its ability to simplify tasks.
Dea Calm Lv1Posted 23 Jun 2023 23:33
  
Sangfor's troubleshooting resources are a lifeline during critical moments.
soneosansan Lv3Posted 22 Jun 2023 16:14
  
It's impressive how Sangfor enhances VDI performance effortlessly.
Happpy Lv3Posted 22 Jun 2023 16:12
  
The helpfulness of Sangfor's features is evident from the start.
Rica Cortez Lv2Posted 22 Jun 2023 16:10
  
Sangfor is a reliable companion for efficient virtualization management.
Robin Lv3Posted 22 Jun 2023 16:07
  
Sangfor is a game-changer, simplifying virtualization tasks.