For IAM traffic measurement for inbound/outbound, does anyone have the experienc

Wachirasak Posted 2018-Apr-10 08:50

For IAM traffic measurement for inbound/outbound, does anyone have the experience of comparing between IAM and any other vendors' products?

For my experience, I used to face that IAM log said both outbound / inbound traffic too high like 5 mins can take several GB which seems difficult practically. Can anyone give the best explanation of this situation?

CTI LS has solved this question and earned 10 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

Hi,

There are 2 methods to sort out internet traffic.
1. Global Exclude internal Server - This will make all the traffic to or from Internal Server to be excluded in Report Center.

2. Create a Custom Application rule based on Internal Server IP - This will make IAM recognize the traffic into specific application, then you can further filter in the report center by deselect the application you have created.
Is this answer helpful?
CTI LS Lv3Posted 2018-Apr-10 10:47
  
Last edited by CTI LS 10 Apr 2018 15:20.

Hi,

The traffic could be caused by several reason. For instance, Windows update, Software update and so on.
Besides, below is another example of traffic that will causes the Traffic to increase too.
Green Arrow = Request from User
Red Arrow = Server reply to User
It passes through IAM WAN port, therefore it will be recorded in report center too.

I Can Help:

Change

Moderator on This Board

1
3
6

Started Topics

Followers

Follow

Board Leaders